0708 CNSE Undergraduate Curricula Proposal 05-05-2008 UAC Approved (2).doc, 2008 May 7

Online content

Fullscreen
A PROPOSAL FOR UNDERGRADUATE ACADEMIC PROGRAMS LEADING TO
THE B.S. IN NANOSCALE SCIENCE AND B.S. IN NANOSCALE
ENGINEERING
Submitted to
THE UNIVERSITY AT ALBANY UNIVERSITY SENATE
By
THE COLLEGE OF NANOSCALE SCIENCE AND ENGINEERING
UNIVERSITY AT ALBANY, STATE UNIVERSITY OF NEW YORK
May 5, 2008
TABLE OF CONTENTS
I.
Introduction……………...…………………………………………………………………
3
I.1 
Preamble……………………………………………………………………………… 3
I.2 
Executive Summary ……………………..…………………………………………… 3
II.
Program Summary…………………………………………………………………………
4
II.1 Mission……………………………………………………………………………….
4
II.1.A Mission Statement for B.S. Program in Nanoscale Science ………………….
5
II.1.B Mission Statement for B.S. Program in Nanoscale Engineering ……….…….
5
II.2 Rationale for the Proposed Programs and Institutional Context …………………….. 6
II.3 Learning Outcomes and Assessment…………………………………………………. 9
II.3.1 Learning Outcomes for B.S. Program in Nanoscale Science……………….…. 9
II.3.2 Learning Outcomes for B.S. Program in Nanoscale Engineering……….….…. 11
II.3.3 Assessment Practice and Methodology…………………………………..……. 12
II.4 Admission…………………………………………………………………….………. 13
II.5
CNSE Undergraduate Committee on Admissions and Academic Standing………….
14
II.6 Curriculum Outline.…………………………………………………………..……… 15
II.6.1 Program Components and Rubrics……………………………………...……..
15
II.6.2 Program Requirements………………………………………………..……….. 16
II.5.2.1 Requirements for B. S. in Nanoscale Science.………………………… 16
II.5.2.2 Requirements for B. S. in Nanoscale Engineering……………………
17
II.6.3 General Education Requirements ……………………………………………… 17
II.6.4 Nanoscale Science Major Academic Pathway (MAP) and Courses ...….…….
19
II.6.4.1 Nanoscale Science MAP …………………………………….……….. 19
II.6.4.2 Proposed Nanoscale Science Course Matrix …………………………. 20
II.6.5 Nanoscale Engineering MAP and Courses ……………………………...…….. 22
II.6.5.1 Nanoscale Engineering MAP ……………………………..…………..
22
II.6.5.2 Proposed Nanoscale Engineering Course Matrix …………….………. 23
II.6.5.3 Accreditation Plans for the Nanoscale Engineering Program ….….….
24
II.6.6 Honors Program, Honors College, and Minor in Nanotechnology..………..…. 25
II.6.7 Student Advising and Career Development …………………………..………
26
III.
Enrollment ………………………………………………………………………...………
27
IV.
Impact of the Programs on Other SUNY Institutions………….…. ……….……..……
27
V.
Faculty ……………………………………………….………………………….…...…….
29
VI.
Appendices
VI.1 Nanoscale Science Course Catalogue Descriptions ………………………………….. 34
2
VI.2 Nanoscale Engineering Course Catalogue Descriptions …………………………….. 41
VI.3 Independent Study and Research Course…………………………………………….. 50
VI.4 Nanoscale Engineering Courses Designated as Non-Liberal Arts and Sciences…….. 51
VI.5 Undergraduate “Nano” Courses at Other SUNY Institutions..…………………..….... 52
3
I.    INTRODUCTION
I.1.
Preamble
As outlined in the outcomes of the University at Albany (UAlbany) 2006 Strategic Compact Planning,1
and the recommendations of the UAlbany Board of Visitors (BOV),2 and in accordance with the UAlbany
College  of  Nanoscale  Science  and  Engineering  (CNSE)  Faculty  Charter  and  Bylaws,  the  CNSE
Curriculum Committee's ad hoc Sub-Committee on Undergraduate Curriculum formally resolved on May
7, 2007 to draft a proposal for two undergraduate curricula for baccalaureate degrees in nanoscale science
and nanoscale engineering.  The Sub-Committee also formally resolved to initiate the process for the
CNSE Curriculum Committee to formally advance these curricula for review and approval of the two
baccalaureate  degrees  per  the  policies  and  guidelines  of  the  College  of  Nanoscale  Science  and
Engineering, the University at Albany University Senate, the University at Albany, the State University of
New York, and the New York State Education Department. The following document outlines both
curricula, as unanimously approved by the CNSE Curriculum Committee and the CNSE Faculty Council
on October 5, 2007.  The document was forwarded to the CNSE Assistant Vice President for Academic
Affairs, who completed his review on November 5, 2007, and advanced the proposal to the Vice President
of CNSE, who completed his review on January 8, 2008.   The document containing both curriculum
proposals, as presented in what follows in a unified format to facilitate review and evaluation, is being
submitted to the University at Albany University Senate for assessment and action.
I.2.
Executive Summary
The College of Nanoscale Science and Engineering (CNSE) of the University at Albany (UAlbany)
proposes two academic curricula leading, respectively, to the degrees of Bachelor of Science in Nanoscale
Science and Bachelor of Science in Nanoscale Engineering. The curricula proposed are intended to attract
and retain at UAlbany a significant portion of the undergraduate student population that is presently
inaccessible to  SUNY and most of  the private  institutions  of  learning in  New York State.   This
inaccessibility is driven by the lack of the interdisciplinary nanoscale science and nanoscale engineering
degrees that are sought by this rapidly growing sector of the university clientele, as documented almost
invariably by each study, blueprint, report, and analysis published by every governmental body, corporate
organization, academic entity, think tank, and cross-organizational panel across the globe--including the
National Science Foundation, which forecasts the need for more than two million nanotechnology
educated  professionals  at  all  employment  levels  in  the  U.S.  by  2014,  with  another  five  million
nanotechnology jobs being required worldwide in support fields and disciplines.
Each curriculum represents a 132-credit program designed for completion in eight academic semesters
and is consistent with the SUNY General Education Program requirements, as implemented at UAlbany.
1
 
The outcomes of the UAlbany 2006 Strategic Compact Planning Process, as endorsed by the UAlbany
University Senate and adopted by the University President, included approval of the concept of undergraduate
degrees in nanoscale science and nanoscale engineering and authorized two CNSE nanoscale engineering faculty
lines to assist in the development of the two curriculum proposals.   
2
 
“BOARD OF VISITORS: Report of Observations and Recommendations,” the University at Albany, June
2006. The BOV called for the creation of the  baccalaureate degrees in Nanoscale Science and Nanoscale
Engineering  and  stated  in  its  report:  “….the  development  of  an  undergraduate  program  in  nanoscience
engineering would…build undergraduate quality, and at the same time help to strengthen the enrollment of math
and science students.”
4
Each curriculum comprises a cutting-edge, inherently interdisciplinary, academic program centered on
scholarly excellence, educational quality, and technical and pedagogical innovation.   The outcome is a
unique undergraduate experience that taps into CNSE’s global academic leadership in nanoscale science
and engineering to attract and educate a diverse and talented pool of qualified scientists and engineers at
the baccalaureate level, and position UAlbany to further cement its role as a competitive and valuable
educational resource to the State University of New York and the State of New York. 
The blueprint of each curriculum is comprised of four basic components:  a “Foundational Principles’”
component,  a  “Core  Competency” component,  a  “Concentration” component  and  a  “Capstone
Research/Design” component.  The first two components are designed to integrate the dissemination of
fundamental, cross-disciplinary, nanoscale science and engineering principles with the cultivation of the
critical skill set necessary for advanced undergraduate coursework and interdisciplinary research.  The
remaining two components expand on these foundational skills to develop the topical expertise, technical
depth, and independent research abilities that are essential to a well-rounded undergraduate educational
experience.   The  combination  of  these  instructional  tools  ensures  two  customizable  and  coherent
undergraduate degree programs that train the student’s intellect how to explore, discover, and innovate,
while ensuring its proficiency in a specific nanoscale discipline.  
The two baccalaureate curricula in nanoscale science and nanoscale engineering exploit the unparalleled
academic,  professional,  and  infrastructural  resources  of  the  College  of  Nanoscale  Science  and
Engineering and its $4B Albany NanoTech research and development (R&D) and education complex.  By
leveraging  CNSE’s  one-of-a-kind  physical  infrastructure,  world-class  interdisciplinary  faculty,  and
extensive public-private partnerships, the proposed undergraduate curricula will hold a scholarly profile
and pedagogical impact that are singularly distinct from and highly complementary to current academic
offerings at the remaining SUNY campuses and other New York State institutions of higher learning.  The
curricula will also serve as an effective tool in the attraction of the highest quality undergraduate students
from around the world to UAlbany, thus further advancing its stature as a top flight research university.
Furthermore, the proposal outlines appropriate academic pathways in both B.S. degree programs for
students electing to participate in CNSE’s Honors Program and/or UAlbany’s Honors College.  In what
follows, relevant admission criteria based on pertinent secondary education preparation are described,
along  with  the  underlying  undergraduate  advisement  philosophy  and  resulting  administrative  and
programmatic structures that ensure student success while maximizing academic options throughout the
student’s undergraduate career at the University at Albany.
II.    PROGRAM SUMMARY
II.1.
Mission 
The proposed CNSE undergraduate curricula in nanoscale science and nanoscience engineering are
designed to provide UAlbany’s undergraduate students with a well-rounded education of the highest
quality--one that endows the student’s intellect with the analytical tools necessary to explore, discover,
and innovate; while cementing the student’s basic proficiency and fundamental knowledge in the science
or engineering of nanotechnology.  As such, the curricula proposed represent a true embodiment of the
UAlbany Mission Statement and its commitment to:
“…the teaching of students, to their growth in knowledge, and to that reinforcement of
character,  through  co-curricular  experiences,  which  enables  them  to  develop
emotionally, physically, and socially even as they mature intellectually…”
5
The relevance of the CNSE undergraduate curricula to the approved mission of the institution,3 and their
tight coupling to its on-going planning process, including its Middle States re-accreditation reviews and
overall campus enrollment planning, are best captured by the institutional strategic goals below.
 “…provide a distinctive, student-centered undergraduate learning experience which will
be highly competitive as the result of its intellectual coherence, rigor and engagement of
students with faculty in the process of inquiry and discovery…” 
 “….assuring inclusiveness and ease of access to its educational programs, and by
actively supporting the application of its teaching and research to the needs of society…”
 “…establish and stabilize enrollment…..with a student body reflective of the rich
diversity required for a quality education, and with an academic profile comparable to
the most selective of this nation's public research universities...”
By building on the scholarly reputation and educational resources of the UAlbany CNSE--ranked in May
2007 as the world's number one college for nanotechnology and microtechnology in the Annual College
Ranking by Small Times magazine--the proposed undergraduate curricula are designed to further advance
the UAlbany academic mission in the burgeoning field of nanotechnology and its key interdisciplinary
science and engineering fields.  Accordingly, the mission statements for the two curricula are:
II.1.A
Mission Statement for the Academic Program Leading to the B.S. in Nanoscale Science
The curriculum is dedicated to providing quality undergraduate education in the interdisciplinary field of
nanoscale science. The program will impart to its students the broad-based, basic and applied, scientific
understanding of atomic scale phenomena, behaviors, and properties of matter that is necessary to achieve
deliberate control over nanometer-scale atomic and molecular architectures and systems.  The program
will also enable a quantitative mastery of the fundamental nature of nanoscale interactions, one that can
be effectively used to characterize and measure the behavior and structure of nanometer scale assemblies
and systems. This degree program as a whole will offer an academically rigorous preparation for students
intending to pursue scientific, technical, or professional careers in nanotechnology enabled fields or
graduate studies in nanoscale science or nanoscale engineering, as well as other physical sciences such as
materials science, physics, and chemistry.
II.1.B
Mission Statement for the Academic Program Leading to the B.S. in Nanoscale Engineering
The curriculum is dedicated to providing quality undergraduate education in the interdisciplinary field of
nanoscale engineering. The CNSE nanoscale engineering undergraduates will be prepared to creatively
solve nanoscale engineering problems through the use of rigorous analytical, computational, modeling,
and experimental tools that are based on foundational physical or biological sciences and mathematics,
nanoscale materials, and applied engineering concepts.  The program will also enable its students to
propose, formulate and execute original, cutting-edge nanoscale engineering research in CNSE’s globally
unique R&D complex. Students completing CNSE’s B.S. program in Nanoscale Engineering will be well-
equipped to solve challenging problems in nanoscale engineering and applied sciences, as well as other
physical and biological engineering sciences, and will be uniquely educated to pursue opportunities in
emerging high technology industries--including nanoelectronics, nanomedicine, health sciences, and
sustainable energy--or competitive graduate degrees in current and emerging engineering fields. 
3
 
“Memorandum of Understanding Between the University at Albany and the State University of New York,”
submitted June 2006 and approved November 2006.
6
II.2 
Rationale for the Proposed Programs and Institutional Context
The natural evolution of disciplined human exploration in the 21st century has led to the emergence of
nanotechnology  as  the  primary  enabler  for  discovery,  innovation,  and  education  in  science  and
engineering.    The essence of nanotechnology is the ability to manage and control the formation and
assembly of individual building blocks of matter at the molecular level, atom by atom, to form macro-
scale physical, biological, and chemical systems with customized properties and precise functionalities.
As such,  nanotechnology has literally transformed and reshaped traditional science and engineering
disciplines: chemistry, physics, electrical engineering, mechanical engineering, materials science and
engineering, molecular biology, and computer science.   As such, nanoscale science and engineering--the
confluence of physics, chemistry, biology, computer science, and engineering--represents a revolution in
science and technology. While unanimity is rarely achieved on any stage, the belief that nanotechnology
will revolutionize human life is, by almost all measures, well documented and universally accepted by the
academic and industrial science and engineering communities:4
“Advances in nanoscience and nanotechnology promise to have major implications for
health, wealth, and peace in the upcoming decades… Over the next 10 to 20 years,
nanotechnology will fundamentally transform science, technology, and society.”
The importance of nanoscale know-how to the U.S. research and pedagogical agendas is best captured in
the multi-billion dollar National Nanotechnology Initiative (NNI), signed into law by the U.S. President
in 2004, which proclaims nanotechnology as “leading to the next industrial revolution.”  The NNI also
calls for the creation of the “laboratory and human resource infrastructure in universities and in the
education of nanotechnology professionals” to prepare future generations of U.S. citizens to compete in
the “innovation economy” of the 21st century.  These conclusions are echoed by the U.S. Commission on
National Security/21st Century in its Report entitled  Roadmap for National Security:  Imperative for
Change.  The report states that: “We also face an unprecedented opportunity.  The world is entering an era
of dramatic progress in bioscience and materials science as well as information technology and scientific
instrumentation.  Brought together and accelerated by nanoscience, these rapidly developing research
fields will transform our understanding of the world and our capacity to manipulate it.”5 
In  response  to  the  resulting  rapid  changes  and  emerging  needs  in  the  research  and  instructional
landscapes, the UAlbany President recommended and the SUNY Board of Trustees (BOT) unanimously
approved in April 2004 the creation of the College of Nanoscale Science and Engineering (CNSE) as a
UAlbany academic unit.  The SUNY BOT action was followed by the implementation of an open
dialogue and extensive collaborative process between the UAlbany University Senate and CNSE faculty
that affirmed an overarching and mutual commitment to a unified UAlbany faculty governance structure,
and established the standards for the various degrees of autonomous CNSE faculty governance in the
areas of graduate curricula, academic standing and appeal, continuing appointment and promotion, and
research.  The resulting CNSE Faculty Bylaws and CNSE Faculty Council Charter were endorsed by the
UAlbany University Senate and CNSE  Faculty Council in December 2004,6 and approved by the
UAlbany President shortly thereafter.
4
 
See, for example, “Science as a Solution:  An Innovation Agenda for the New President” (the Association
of American Universities (March 2008); and M.C. Roco and W.S. Bainbridge (eds.), “Societal Implications of
Nanoscience and Nanotechnology” (Dordrecht: Kluwer Academic Press, 2001)
5
 
Nanotechnology Technology Initiative:  Leading to the Next Industrial Revolution (National Science and
Technology Council, Maryland, first edition published on September 1999, updated yearly); and J. Jasinski and
P. Petroff, in Nanotechnology Research Directions: IWGN Workshop Report, eds. M.C. Roco, S. Williams, and
P. Alivisatos (National Science and Technology Council, Maryland, February 2000), pp. 77-96; and “Roadmap
for National Security:  Imperative for Change,” (the U.S. Commission on National Security/21st Century (2001).
6
 
UAlbany University Senate Resolution Number 0405-01R (December 6, 2004).
7
As stated in the SUNY BOT resolution, the overarching mission of CNSE is to “enable the discovery and
dissemination of fundamental knowledge in the emerging interdisciplinary fields of nanotechnology and
provide the citizens of New York with a comprehensive education of the highest quality.”   In accordance
with its vision and mission, CNSE has developed a multi-phase, long-term strategic plan that reshapes the
traditional  departmental  structure  into  four  constellations  of  scholarly  excellence  in  research  and
development, education, technology deployment, and economic outreach.   Conceived as catalysts that
encourage  and stimulate cross-disciplinary  educational and  research  initiatives,  these “think  tanks”
embody the fundamental intellectual underpinnings of nanotechnology and can be summarized as:
Nanoscience: The  observation,  identification,  description,  discovery,  experimental
investigation, and theoretical interpretation of nanoscale phenomena. 
Nanoengineering: The application of nanoscience principles to practical applications,
such as the atomic scale design, manufacture, and operation of efficient and functional
structures, machines, processes, and systems. 
Nanoeconomics: The formulation, study, and analysis of the economic and business
principles underlying the development and deployment of nanoscale know-how, products,
and systems. 
Nanobioscience: The application of nanoscale scientific concepts and principles to the
study of biological, biomedical, and medical procedures, practices, structures, systems,
and organisms.
In accordance with its strategic plan, CNSE created three of its four constellations, namely, nanoscience,
nanoengineering and nanoeconomics in September 2004.  Concurrently, CNSE  established its first
graduate  curriculum,  leading  to the  degrees  of Doctor  of Philosophy  and Masters  of  Sciences in
NanoScience and NanoEngineering.  This step was followed by the creation of its fourth constellation of
excellence in nanobioscience in June 2006.  Furthermore, in December 2006, CNSE completed the
appropriate internal (UAlbany and SUNY) and external (SED) review and approval process necessary to
establish two separate graduate curricula, one in nanoscience and the other in nanoengineering.  The
successful conclusion of the review process enabled CNSE to offer two separate sets of Ph.D. and M.S.
degrees, one in nanoscale science, the other in nanoscale engineering, as well as to implement a dual
cross-disciplinary M.S. program in Nanotechnology Management (Nano-MBA) in partnership with the
UAlbany School of Business.  These degrees are designed to prepare students to be leaders in the various
interdisciplinary fields of nanotechnology, in accordance with the national science and engineering
roadmap for competitiveness in the global economy of the 21st century:
“An adequately trained scientific workforce is essential for creating and transforming the
industries that will realize the benefits of nanotechnology”7
Among the many areas of intellectual strength and scholarly excellence of the CNSE, one of the most
visible has been nanoelectronics. Nanoelectronics and nanotechnology involve the tiny engines and brains
that drive millions of products and services. Computers, digital cameras and cell phones all work due to
the manipulation and control of materials at the nanometer level – and the CNSE offers a unique
environment for research and education involving these advanced device structures. As device dimensions
continue to shrink, the demands placed on the students going into this field will be significant, although
the potential benefits are undeniable:
7
 
“Nanotechnology: Societal Implications—Maximizing Benefits for Humanity: A Report of the National
Nanotechnology Initiative Workshop” (eds M. C. Roco and W. S. Bainbridge, December 2003) 
8
“If  we  are  successful  in  developing  nanoelectronic  devices  and  nanofabrication
techniques for manufacturing them in huge volumes at very low cost, the impact on
society will be enormous”8
Additional assets of research prominence and educational innovation abound within the CNSE, with each
asset providing a unique set of technical challenges and innovation opportunities. In particular, clean
efficient energy is a scientific challenge and global goal to help reduce mankind’s footprint on the
environment. Many technologies have potential to meet this need such as: new generations of advanced
photovoltaics or solar cells based on thin film nanocrystalline materials which offer higher efficiencies;
advanced fuel cells and advanced hydrogen storage technology require research and development in
nano-materials and manufacturing. The impact of nanotechnology in the development of these and other
future energy platforms has been recognized by the DOE's Under Secretary for Science R.L. Orbach:9
“Breakthroughs  in  the  effective  use  of  renewable  energy  through  improved  energy
conversion, transmission, and storage are key to overcoming our nation's reliance on
imported fossil fuels and attaining energy independence in the long term. The study and
design of materials at the nanoscale has the potential to address these significant
challenges…”
Another growing area of excellence within the CNSE lies at the intersection of the biological and physical
sciences. Nanomedicine is an emerging research area that has been born out of molecular nanotechnology,
which focuses on the ability to create materials and devices with molecular precision. Nanomedicine
employs the knowledge base of molecular nanotechnology to deliver new systems to address medical
problems. In turn this will maintain and improve human health and have profound implications for the
medical profession in the areas of disease elimination, diagnosis, and treatment of medical conditions.
The impact of nanomedicine in preserving and improving human health has been recognized by the
National Institute of Health nanomedicine roadmap:10
“Researchers have developed powerful tools to extensively categorize the parts of cells
in vivid detail, and we know a great deal about how these intracellular structures
operate. Yet, scientists have still not been able to answer questions such as, "How
many?" "How big?" and "How fast?" These questions must be addressed in order to
build "nano" structures or "nano" machines that are compatible with living tissues and
can safely operate inside the body. Once these questions are answered, we will design
better diagnostic tools and engineer structures for more specific treatments of disease
and repair of tissues.”
The  single  most  important  step  in  the  successful  capitalization  on  the  tremendous  potential  of
nanotechnology and its various disciplines involves the development and implementation of innovative
instructional and training programs to prepare qualified scientists and engineers at all academic levels,
from K-12 through graduate education.  As pointed out earlier, this assessment is supported by practically
every study, blueprint, report, and analysis published by every governmental body, corporate organization,
academic entity, think tank, and cross-organizational panel across the globe--including  the National
Science Foundation, which forecasts the need for more than two million nanotechnology educated
professionals at all employment levels in the U.S. by 2014, with another five million nanotechnology jobs
being required worldwide in support fields and disciplines.
8
 
R. Doering, op. cit., p. 87.
9
 
http://www.bnl.gov/bnlweb/pubaf/pr/PR_display.asp?prID=07-58.
10  
http://nihroadmap.nih.gov/newpathways.
9
As outlined in  the National  Nanotechnology  Initiative roadmap,  the  outcomes of  the  UAlbany 2006
Strategic Compact Planning and the recommendations of the UAlbany Board of Visitors (BOV),11,12 and
in accordance with its strategic plan,  the CNSE is proposing  two undergraduate curricula leading to
baccalaureate degrees in nanoscale science and nanoscale engineering.  The two degrees are synergistic
and complementary in scope and objectives, and build on each other’s strengths to maximize return on
investment and ensure paramount effectiveness in advancing the university’s educational mission and
overarching goals.  This move will ensure that UAlbany and its CNSE retain their global academic
prominence within the highly competitive arena of nanotechnology, and continue to be highly responsive
to the increasingly diversified needs and interests of UAlbany’s ever expanding student clientele.   
II.3 
Learning Outcomes and Assessment
The two customizable and coherent undergraduate degree proposals are designed to educate the student to
explore, discover, and innovate, while ensuring his or her proficiency in one of the two fundamental
pillars of nanotechnology.  As such, CNSE is committed to make certain that the proposed baccalaureate
programs meet or exceed the standards of scholarly excellence and academic quality required to graduate
scientists, engineers, and professionals who can successfully navigate careers in nanotechnology and, in
turn, deliver the innovations that are the lifeline of modern-day academic institutions, global corporations,
and the business world.  
To meet these stringent targets of “intellectual coherence, rigor and engagement,” CNSE has developed a
comprehensive and integrated set of basic learning outcomes that must be met by students to qualify for
graduation.  Each set of learning outcomes has been customized to reflect the specific goals and
objectives of the corresponding degree in nanoscale science or nanoscale engineering, while accounting
for the natural overlap which results from the interdisciplinary nature, complementary pedagogical
principles, and unified performance metrics of the two disciplines.  
The learning outcomes are coupled to a unified, multi-phase, performance evaluation and learning
assessment methodology to track and measure student progress towards educational goals and degree
requirements throughout the student’s undergraduate career in the CNSE.  This assessment methodology
is designed to begin with entering UAlbany freshmen who are interested in nanoscale science or
nanoscale engineering to analyze and measure their aptitude and ability to pursue B.S. degrees in
nanoscale science or nanoscale engineering and offer them accurate guidance and pertinent advice in
terms of appropriateness of such paths versus other opportunities for undergraduate study at UAlbany.
II.3.1 
Learning Outcomes for B.S. Program in Nanoscale Science (NSCI)
The learning outcomes are designed to ensure that the CNSE NSCI graduates demonstrate the technical
and professional proficiencies necessary to enable the identification, description, discovery, experimental
investigation, and theoretical interpretation of nanoscale phenomenon and, as a result,  become highly
successful scientists, educators, and leaders in the global “innovation economy” of the 21st century. 
__________________________________
11 The outcomes of the UAlbany 2006 Strategic Compact Planning Process, as endorsed by the University Senate
and University President, included approval of the concept of undergraduate degrees in nanoscale science and
engineering and authorized two CNSE faculty lines to assist in the development of the two curriculum proposals.
12 “BOARD OF VISITORS: Report of Observations and Recommendations,” UAlbany, June 2006. The BOV
called for the creation of the baccalaureate degrees in Nanoscale Science and Nanoscale Engineering and stated
in its report: “….the development of an undergraduate program in nanoscience engineering would…build
undergraduate quality, and at the same time help to strengthen the enrollment of math and science students.”
10
Nanoscale Science Outcome 1
CNSE NSCI graduates will exhibit basic knowledge of mathematics, particularly statistics, linear algebra,
multivariate calculus, and differential equations, and the foundational principles of nanoscale science
necessary for knowledge development and theoretical and experimental problem-solving in nanoscale
systems and architectures.
Nanoscale Science Outcome 2 
CNSE NSCI graduates will possess the analytical abilities and scientific know-how to systematically
design, conduct, and complete successful experimental procedures and applied tasks, including the skill
set to analyze and interpret data from a variety of sources (experiment, simulation, etc). 
Nanoscale Science Outcome 3
CNSE NSCI graduates will have the ability to analyze, construct or conceive a theoretical or practical
nanoscale system, component, or process necessary to elucidate the fundamental nanoscale properties of a
given atomic level phenomenon or architecture to meet desired target specifications within realistic and
practical constraints. The latter are those that would typically be encountered in the real world of applied
nanoscale research and development.
Nanoscale Science Outcome 4
CNSE NSCI graduates will be able to comprehend the cross-disciplinary nature of a nanoscale problem
(technical and/or non-technical aspects) when appropriate and, as a result, be capable of functioning and
contributing as successful team members within inter-disciplinary R&D organizations.
Nanoscale Science Outcome 5
CNSE NSCI graduates will have the knowledge to identify, analyze, deconstruct, and solve well-defined,
open-ended, or poorly-defined research problems in nanoscale science.
Nanoscale Science Outcome 6
CNSE  NSCI  graduates will  have  a clear understanding of their  professional, societal,  and  ethical
responsibilities as scientists, researchers, educators, and responsible members of society at large.
Nanoscale Science Outcome 7
CNSE NSCI graduates will demonstrate clear and effective communication skills, both oral and written,
in technical and non-technical environments.  
Nanoscale Science Outcome 8
CNSE NSCI graduates will have the broad “well-rounded” education profile necessary to understand,
appreciate, and direct the impact of nanoscale science phenomena, innovations, and applications at the
local,  regional,  and  global  economic,  environmental,  technological,  and  societal  levels.  This
comprehensive education will be achieved through an appropriate integration of the UAlbany General
Education requirements with the CNSE NSCI curriculum requisites.
Nanoscale Science Outcome 9
CNSE NSCI graduates will acquire an embedded recognition of the need for, and responsive ability to
engage in life-long, self-motivated learning.
Nanoscale Science Outcome 10
CNSE NSCI graduates will exhibit pertinent and timely knowledge of contemporary issues, discoveries,
and events that are related to nanoscale science, nanoscale engineering and nanotechnology and their
potential impact on industry, business, and society.
11
Nanoscale Science Outcome 11
CNSE NSCI graduates will possess the techniques, skills, and modern engineering tools necessary for
effective nanoscale science research.
II.3.2
Learning Outcomes for B.S. program in Nanoscale Engineering (NENG)
The learning outcomes are designed to ensure that the CNSE NENG graduates display the technical and
professional proficiencies necessary for the successful and effective application of nanoscience principles
to practical applications, such as the atomic scale design, manufacture, and operation of efficient and
functional structures, machines, processes, and systems and, as a result,  become highly successful
engineers, educators, and leaders in the global “innovation economy” of the 21st century. 
Nanoscale Engineering Outcome 1
CNSE NENG graduates will exhibit applied knowledge of mathematics, particularly statistics, linear
algebra, multivariate calculus, and differential equations, and the practical principles of nanoscale science
and  engineering  essential  for solving real life  problems in  atomic scale design,  manufacture, and
operation of efficient and functional structures, machines, and processes.
Nanoscale Engineering Outcome 2
CNSE NENG graduates will possess the analytical abilities and engineering know-how to systematically
design, conduct, and complete successful experimental procedures and applied tasks, including the skill
set to analyze and interpret data from a variety of sources (experiment, simulation, etc). 
Nanoscale Engineering Outcome 3
CNSE NENG graduates will have the ability to analyze, construct or conceive a functional nanoscale
system, component, or process that exploits basic and applied nanoscale principles to elucidate the
observed behavior and measured properties of a given phenomenon or architecture to meet desired target
specifications within realistic and practical constraints. The latter are those that would typically be
encountered  in  real-world  nanoscale  engineering  problems  and  may  include  performance,  time
(scheduling), funding, manufacturability, environmental, societal, and other constraints.
Nanoscale Engineering Outcome 4 
CNSE NENG graduates will be able to comprehend the cross-disciplinary nature of a nanoscale problem
(technical and/or non-technical aspects) when appropriate and, as a result, be capable of functioning and
contributing as successful team members within inter-disciplinary R&D organizations.
Nanoscale Engineering Outcome 5 
CNSE NENG graduates will exhibit the ability to identify, formulate and solve both well-defined, open-
ended, or poorly-defined practical problems in nanoscale engineering.
Nanoscale Engineering Outcome 6
CNSE NENG graduates will have a clear understanding of their professional, societal, and ethical
responsibilities as engineers, researchers, educators, and responsible members of society at large.
Nanoscale Engineering Outcome 7
CNSE NENG graduates will demonstrate clear and effective communication skills, both oral and written,
in technical and non-technical environments.  
Nanoscale Engineering Outcome 8
CNSE NENG graduates will possess the broad “well-rounded” education profile necessary to understand,
appreciate, and direct the impact of nanoscale engineering phenomena, products, and processes at the
12
local,  regional,  and  global  economic,  environmental,  technological,  and  societal  levels.  This
comprehensive education will be achieved through an appropriate integration of the UAlbany General
Education requirements with the CNSE NSCI curriculum requisites.
Nanoscale Engineering Outcome 9: CNSE NENG graduates will acquire an embedded recognition of the
need for, and responsive ability to engage in life-long, self-motivated learning.
Nanoscale Engineering Outcome 10: CNSE NENG graduates will exhibit pertinent and timely know-how
for  contemporary  issues,  discoveries,  and  events  that  are  related  to  nanoscale  science,  nanoscale
engineering and nanotechnology and their potential impact on industry, business, and society.
Nanoscale Engineering Outcome 11: CNSE NENG graduates will possess the techniques, skills, and
modern R&D tools necessary for successful careers in nanoscale engineering fields.
II.3.3 
Assessment Practice and Methodology 
A systematic, broad-based, and multi-pronged approach will be employed to assess student’s progress
towards and achievement of the learning outcomes outlined in Sections II.3.1 and II.3.2.  This approach
employs three primary metrics: course-embedded assessment; student-peer assessment; and capstone
experience-driven assessment.  These metrics are defined using the four pedagogical pillars and rubrics of
each undergraduate degree, as described in Section II.5.1.
II.3.3.1 Course-embedded Assessment Metric
This metric employs the well-documented quantitative (grading) system typically applied in individual
lecture and laboratory courses.  In addition to the conventional oral and written examinations and out-of-
class assignments, this approach will also employ novel in-class student response strategies.  In particular,
the use of real-time electronic tools, such as wireless ‘clickers,’ to provide a live form of student response
and feedback will offer an additional assessment tool for both introductory and advanced lecture courses.
This  approach  has  proved  very  effective  in  first-year  student  instruction  within  CNSE’s  graduate
programs in nanoscale science and nanoscale engineering.  The in-class electronic response system and
on-demand application methodologies are already available in the classroom infrastructure of the CNSE
Albany NanoTech Complex and are readily deployable for the undergraduate programs proposed.
II.3.3.2 Student-peer Assessment Metric
A student-peer assessment metric will also be implemented beginning with the fifth and throughout the
eighth semester of the undergraduate curricula proposed.  It consists of an undergraduate student peer-
review and feedback approach that uses systematic oral and poster presentations by individual students or
teams of students.  This approach is in line with basic components of both proposed undergraduate
programs targeting the development of the critical communication skills necessary for success.  A similar
graduate student peer-based assessment is a prominent feature of the current CNSE graduate programs.  It
has proven to be an effective tool in fostering a collaborative, interdisciplinary environment, while
providing critical feedback for student skill development.  The specific format of the undergraduate
student-peer assessment is expected to be venue dependent, including individual feedback for oral
presentations, written critiques for poster presentations, and a variation of the in-class student response
system for large-audience student presentations.
II.3.3.3 Capstone Experience – A Research Project-Based Assessment Metric
As noted in Section II.5.1 below, a basic pillar of the undergraduate curricula proposed is the Capstone
Undergraduate Research/Design experience.  This multi-semester, research-based, rubric also serves as a
critical assessment tool to gauge student’s scholarly and research achievements and progress in meeting
the learning outcomes outlined in Sections II.3.3.1 and II.3.3.2. The assessment methodology for the
13
Capstone  Experience  focuses  on  the  direct  evaluation  of  student  performance  by  the  faculty
mentor/advisor (as well as faculty committees as appropriate) regarding the student’s scientific, technical,
and conceptual (analytical) knowledge in nanoscale science and nanoscale engineering, the student’s oral
and written communication skills and ability to work well within a team environment, and the student’s
mastery of literature searches, technical writing, and report preparation.  In addition, since each Capstone
Experience will include a public presentation, multiple opportunities for peer-assessment and broader
faculty evaluation will be leveraged to calibrate student performance and for achievement of the overall
nanoscale science and nanoscale engineering program mission and goals.
II.4 
Admission 
The process for admission to the proposed undergraduate programs for both freshmen and transfer
applicants  will  follow  the  standard  UAlbany  application  procedures  for  restricted  undergraduate
applicants.  Applicable admission requirements are outlined below for the three potential scenarios of
restricted applications, namely, Freshman, Advanced Standing, and Transfer.  It should be noted that only
undergraduate students formally admitted to the programs in nanoscale science or nanoscale engineering
are  eligible  to  enroll  in  Foundational  Principles  Courses,  Core  Competency  Courses,  Technical
Concentration  Courses  or  Capstone  Research/Design  Courses  in  nanoscale  science  or  nanoscale
engineering (see Section II.5.2 Program Requirements). 
II.4.1
Restricted Admission with Freshman Status
At the beginning of each Fall Semester, qualified UAlbany freshmen who demonstrate documented
scholarly excellence and academic interest in nanoscale science or nanoscale engineering could be offered
an opportunity for direct freshman admission to the CNSE undergraduate programs proposed.  Decisions
regarding direct freshman admission to CNSE will be made by the CNSE Vice President based on a
recommendation from the CNSE Undergraduate Committee on Admissions and Academic Standing (see
Section II.5).  The committee recommendation will be based on a thorough review of the student’s
secondary school performance as reflected in high school grade point average (HSGPA), school-based
tests such as Regents exams, scores on the SAT or ACT national exams, overall graduating class rank,
letters of recommendation, and potentially a personal interview.  The standard eligibility for consideration
will be a minimum HSGPA of 87.5% and a minimum SAT of 1,320 (1600 scale) and/or a minimum ACT
of 25. Exceptions to the standard eligibility may be made based on individual achievement and/or unique
skills or experience.  Students selected for Direct Freshmen Admission in nanoscale science or nanoscale
engineering  will  be  required  to  document  their  intent  to  declare  their  majors  accordingly.   The
overarching goal of Direct Freshmen Admission to CNSE undergraduate programs is the identification of
outstanding and singularly prepared students who are poised for success in the fields of nanoscale science
or engineering.  It is expected that these students will rapidly excel and perform in accordance with the
highest academic standards at UAlbany.   Students must meet University at Albany requirements for good
academic standing to retain their enrollment in the CNSE undergraduate programs.
II.4.2.
Restricted Admission with Advanced Standing Status
Undergraduate students at UAlbany who are not formally enrolled in the CNSE undergraduate programs
are offered an opportunity for direct admission to CNSE after completing 24 credits of qualified science
or engineering coursework at UAlbany.  Decisions regarding Advance Standing Admission to CNSE will
be made by the CNSE Vice President based on a recommendation from the CNSE  Undergraduate
Committee  on  Admissions  and  Academic  Standing  following  a  review  of  the  student’s  UAlbany
transcript, relevant technical or research performance, and secondary school performance (using the
criteria described in Section II.4.1).  The standard eligibility for consideration will include a minimum
14
UAlbany GPA of 3.5 in relevant coursework.  Exceptions to standard eligibility may be made based on
individual achievement, unique skills, or experience.  The goal of Admission with Advanced Standing is
the identification of outstanding students who have demonstrated the ability to excel at the university
level and a scholarly aptitude for the fields of nanoscale science or nanoscale engineering.  Although all
applications will be considered, completion of the program within a four-year residency at the University
at Albany will remain a top priority.   Advanced Standing students who do not satisfy standard eligibility
for  admission  with  advanced  standing  to  CNSE  undergraduate  programs  may  contact  CNSE  for
individual consideration. Some students may be granted conditional status, with admission to the program
contingent upon satisfactory completion of a specific academic contract.
II.4.3.
Restricted Admission of Transfers with Advanced Standing
UAlbany students who are admitted as “Transfer” students are offered an opportunity for direct admission
to CNSE if they have completed 24 credits of qualified science or engineering coursework at their former
institution(s).  Decisions regarding Transfer with Advanced Standing admission to CNSE will be made by
the CNSE Vice President based on a recommendation from the CNSE  Undergraduate Committee on
Admissions and Academic Standing following a review of the student’s college or university transcript,
relevant  technical  or  research  performance,  and  secondary  school  performance  (using  the  criteria
described in Section II.4.1).  The standard eligibility for consideration will include a minimum college or
university GPA of 3.5 in relevant coursework. Exceptions to the standard eligibility may be made based
on individual achievement and/or unique skills or experience.  The goal of Restricted Admission of
Transfers with Advanced Standing to CNSE undergraduate programs is the identification of outstanding
transfer students that have demonstrated the ability to excel at the university level and an aptitude for the
fields of nanoscale science or engineering.  Although all applications will be considered, completion of
the program within a time period that does not exceed the four-year residency at UAlbany will remain a
top priority.  Transfers with Advanced Standing students who do not satisfy standard eligibility for
admission with advanced standing to CNSE undergraduate programs may contact CNSE for individual
consideration.  Some  students  may  be  granted  conditional  status,  with  admission  to  the  program
contingent upon satisfactory completion of a specific academic contract.
II.5
CNSE  Undergraduate  Committee  on  Admissions  and  Academic
Standing
CNSE will maintain a formal Undergraduate Committee on Admissions and Academic Standing.  In
addition to the implementation of the admissions process as outlined in Section II.4, the committee is
responsible for reviewing the following matters brought to its attention, and making a recommendation to
the Vice President for disposition of those matters. The process and deliberations will follow established
University policies and protocol for due process.  The Committee will consist of the chair, three teaching
faculty, and the Director of Student Services (or designee).   The Committee tasks include:
II.5.1
Appeals of Admission Decisions
The Committee will review appeals to denial of admission to the CNSE programs.  The Committee will
review all evidence brought forward by the prospective student and will make a recommendation to the
Vice President.  The Vice President will make the final decision, which will be communicated to the
student  via  the  Office  of  Student  Services.  The  process  and  deliberations  will  follow  established
University policies and protocol for due process.
II.5.2
Grade Grievances
15
The committee will investigate and deliberate on cases brought by students who consider that they were 
aggrieved by the grading process.  The committee will review the evidence and make a recommendation
for disposition of the grievance to the Vice President.  The Vice President will make the final decision,
which will be communicated to the student via the Office of Student Services.  The process and
deliberations will follow established University policies and protocol for due process.
II.5.3
Honors Program 
The Committee will review appeals of students petitioning for reinstatement to the CNSE honors
programs.  Such review may include, but not be limited to, students’ written appeals and consultations
with the students’ instructors, the CNSE honors program director, and Assistant Vice President of
Academic  Affairs,  as  appropriate.   Upon  completion  of  the  review  the  Committee  will  make  a
recommendation to the Vice President.  The Vice President will make the final decision, which will be
communicated to the student via the Office of Student Services.  The process and deliberations will
follow established University policies and protocol for due process.
II.5.4    Removal from and reinstatement to CNSE Major
The College of Nanoscale Science and Engineering proposes to follow the University Policy on academic
dismissal.  CNSE does wish to accept its responsibility for reinstatement decisions to the major by
establishing  a  parallel  appellate  route  for  students  seeking  reinstatement  to  UAlbany  after  being
academically dismissed.  The dismissed student would follow the normal procedure for appealing the
academic dismissal but would also file an appeal with CNSE’s Committee on Admissions and Academic
Standing.  The review of this appeal would include, but not be limited to, the student’s written appeal and
documentation, consultations with the student’s instructors and advisor, and the CNSE Associate Vice
President for Academic Affairs, as appropriate.  The committee will review the appeal and make a
recommendation to the Vice President.  The Vice President will make the final decision, which will be
communicated to the student via the Office of Student Services.  The process and deliberations will
follow established University policies and protocols for due process.
II.6 
Curriculum Outline
II.6.1 
Program Components and Rubrics
Building on the innovation and success of CNSE’s groundbreaking graduate programs in nanoscale
science and nanoscale engineering, the proposed undergraduate academic programs are each comprised of
four building blocks designed to preserve both the inherent flexibility required for a true interdisciplinary
undergraduate degree and the academic rigor and scholarly excellence demanded by the fields of
nanoscale science and nanoscale engineering.
II.6.1.1 Foundational Principles of Nanoscale Science or Nanoscale Engineering: 
The course and laboratory contents of the Foundational Principles components of the two degrees
proposed are designed to provide the core nanoscale science or nanoscale engineering principles and
intellectual  “skill  sets”  required  to  ensure  elementary  understanding  and  basic  knowledge  of  the
disciplines of nanoscale science or nanoscale engineering. 
II.6.1.2  Core Competencies in Nanoscale Science or Nanoscale Engineering
 
 : 
The course and laboratory contents of the Core Competency components of the two degrees proposed are
intended to impart the sophisticated capabilities required for advanced, in-depth, study in nanoscale
science or nanoscale engineering.
16
II.6.1.3  Concentrations in Nanoscale Science or Nanoscale Engineering
 
 : 
This component of each degree is comprised of specialized undergraduate coursework or individually-
directed independent study in a specific nanoscale science or nanoscale engineering concentration area.
Combined with upper level elective courses, this component of each degree permits a high degree of
interdisciplinary instructional customization. 
II.6.1.4 Capstone Undergraduate Research/Design in Nanoscale Science or Nanoscale Engineering: 
This component of each degree entails 3 semesters of individually-directed independent research that will
serve as an on-site internship within a true research environment that is conducive to innovation and
discovery. 
Taken as a whole, the four components of each degree merge and integrate basic and advanced course and
laboratory work with customized skills training and individually-directed independent research.  This
combination of pedagogical tools ensures two customizable and coherent undergraduate degree programs
and teaches the student how to explore, discover, and innovate, in addition to being well proficient in a
specific nanoscale discipline.  Additionally, it is proposed that a series of Nanotechnology Survey
Courses be offered to program participants and UAlbany students, at large, to introduce critical concepts
and approaches in nanoscale science and nanoscale engineering and stimulate undergraduate discourse in
related topics including societal, economic, and cultural impacts of nanotechnology.
From an implementation perspective, it is recommended that the University establish two new course
rubrics,  NSCI  and  NENG,  to  be  associated  with  Nanoscale  Science  and  Nanoscale  Engineering
undergraduate academic offerings, respectively. These rubrics may or may not be expanded to include
current or future CNSE graduate course offerings. In addition, for the initial implementation of the
Nanoscale Science and Nanoscale Engineering undergraduate degree programs it is recommended to
cross-list the ‘Foundational Principles’ courses as a reflection of the highly interdisciplinary nature of
both programs. 
II.6.2 
Program Requirements
Both  nanoscale  science  and  nanoscale  engineering  undergraduate  academic  programs  require  the
completion of 102 credits of major-specific coursework, in addition to 30 credits of general education
requirements.  Although larger than the typical course loads associated with traditional science programs,
these  requirements are  standard for  undergraduate  engineering programs  at SUNY research center
campuses.
II.6.2.1  Requirements for the B.S. in Nanoscale Science:
 
   The B.S. program in Nanoscale Science
requires the completion of the following:

‘Foundational Principles’ Courses.  Twenty (20) credits of NSCI 110, NSCI 112, NSCI 120,
NSCI 122, and NSCI 124 (or NSCI 124T). NSCI 122 and NSCI 124 may be replaced by NSCI
130 and NSCI 132 for students pursuing a nanobioscience concentration.

‘Core Competencies’ Courses.  Twenty-one (21) credits of NSCI 220 (or NSCI 220T), NSCI 230
(or NSCI 230T), NSCI 300, NSCI 305, NSCI 350, NSCI 360, and NSCI 410.

‘Concentrations’ Courses. Twelve (12) credits of nanoscale science concentration courses and
nine (9) credits of 400-level Nanoscale Science topical elective courses.
17

‘Capstone Undergraduate Research/Design’ Courses.  Nine (9) credits of NSCI 390, NSCI 490,
NSCI 492 (or NSCI 493).

In addition, students in the nanoscale science program must complete:

Six (6) credits of nanotechnology survey courses; 

Six (6) credits of 200-level Nanoscale Science and Technology Skills electives;

One (1) credit of a senior seminar courses (NSCI 498 or equivalent); and

Eighteen (18) credits of the following courses in mathematics (or their equivalent):
AMAT 112 (or AMAT 118T), AMAT 113 (or AMAT 119T), AMAT 214 (or AMAT
214T), AMAT 220, and AMAT 314. 
II.6.2.2 Requirements  for  the  B.S.  in  Nanoscale  Engineering: 
 The  B.S.  program  in  Nanoscale
Engineering requires the completion of the following:

‘Foundational Principles’ Courses. Twenty (20) credits of NENG 110, NENG 112, NENG
120, NENG 122, NENG 124. NENG 124 may be replaced by NENG 130.

‘Core Competencies’ Courses.  Twenty-seven (27) credits of NENG 301, NENG 302, NENG
303, NENG 304, NENG 405, NENG 406, NENG 407 and NENG 408.

‘Concentrations’ Courses.  Nine (9) credits of Nanoscale Engineering Concentration courses
from each concentration area and six (6) credits of 400-level Nanoscale Engineering or Science
topical elective courses.

‘Capstone Undergraduate Research/Design’ Courses. Nine (9) credits of NENG 390, NENG
490, NENG 492 (or NENG 493).

In addition, students in the Nanoscale Engineering program must complete:

Six (6) credits of Nanotechnology Survey courses; 

Nine (9) credits of 200-level Nanoscale Engineering Design and Skills electives; 

One (1) credit of a senior seminar courses (NENG 498 or equivalent); and 

Fifteen (15) credits of the following courses in mathematics (or their equivalent): AMAT
112 (or AMAT 118T), AMAT 113 (or AMAT 119T), AMAT 214 (or AMAT 214T), and
AMAT 311. 
II.6.3 
General Education Requirements
The General Education Program at the University at Albany consists of a minimum of 30 credits of
coursework in the following areas: disciplinary perspectives, cultural and historical perspectives, and
communication and reasoning competencies.  The General Education Program is summarized in Table I
below.
The  Natural  Science  General  Education  requirements  are  satisfied  by  NSCI/NENG  “Foundational
Principles” courses and the Nanotechnology Survey Courses (NENG/NSCI 101 and 120).  Furthermore,
the Mathematics and Statistics General Education Requirements are satisfied by the required mathematics
courses.  Also, the Social Science lower-level writing requirements are satisfied by NENG/NSCI 102 and
103. Likewise, 400-level  “Senior  Undergraduate Capstone”  courses  will  satisfy General Education
requirements for Information Literacy, Oral Discourse, and Upper-level Writing.  As noted in the
University at Albany Undergraduate Bulletin, students may not use the same course to fulfill both the Arts
and the Humanities categories. Otherwise, if a course fulfills more than one category, students may use
the course to fulfill all of those categories. Although such “double counting” may reduce the number of
18
credits needed to fulfill General Education requirements to graduate from the University, each student
must have satisfactorily completed a minimum of thirty (30) graduation credits in courses designated as
General Education requirements. 
If a course fulfilling a General Education category also meets a major requirement, there is no prohibition
against counting the course toward General Education and the major.  CNSE majors will be advised to
make appropriate use of double-counting General Education courses for those categories not currently
met through waiver by appropriate NYS Regents test scores (cf. American history and foreign language),
Advanced Placement  credit (cf. calculus, foreign language, social science, American history, European
history), or other college-level coursework earned in high school.  CNSE has prepared an advising chart
to assist its students in appropriate General Education course selection to maximize their educational
experience.
Table I.  General Education Requirements for undergraduate students in
nanoscale science or nanoscale engineering.
Requirement
Credits
Disciplinary Perspectives
   Arts
   Humanities
   Natural Sciences
   Social Sciences
(min. 3 crs)
(min. 3 crs)
(min. 6 crs)
(min. 6 crs)
Cultural and Historical Perspectives
   U.S. Historical Perspective
   Europe 
   Regions beyond Europe
   Global and Cross-Cultural Studies
   U.S. Diversity and Pluralism
(min. 3 crs)
(min. 3 crs)
(min. 3 crs)
(min. 3 crs)
(min. 3 crs)
Communication & Reasoning Competencies
   Information Literacy
   Oral Discourse
(min. 1 course)
(min. 1 course)
Written Discourse
  Lower-level Writing
  Upper-level Writing
(min. 1 course)
(min. 1 course)
Mathematics and Statistics
   One semester of collegiate study, or the equivalent, of mathematics at or above
the level of pre-calculus and/or probability, statistics, and data analysis
Foreign Language
   Two semesters of collegiate study, or the equivalent, of a foreign language
19
II.6.4. Nanoscale Science Semester-by-Semester Major Academic Pathway (MAP), Course Matrix, and Catalog Descriptions
II.6.4.1
  Table II.  B.S. in Nanoscale Science Semester-by-Semester Major Academic Pathway (MAP)
Yea
r
Fall
Credi
ts 
Spring
 Credi
ts
1
NSCI/NENG 110 – Chemical Principles of Nanoscale Sci and Eng I1
4
NSCI/NENG 112 – Chemical Principles of Nanoscale Sci and Eng II1
4
AMAT 112 or 118T – Calculus I
4
AMAT 113 or 119T – Calculus II
4
NSCI/NENG 120 – Physical Principles of Nanoscale Sci and Eng I1
4
NSCI/NENG 122 – Physical Principles of Nanoscale Sci and Eng II1
4
NSCI 101 – Nanotechnology Survey1
3
NSCI/NENG 102 – Societal Impacts of Nanotechnology2,3
3
GE*  (optional, if not taken, will be made up in future semesters)
3
GE (optional, if not taken will be made up in future semesters)
3
15-18
15-18
2
NSCI 124 or 124T – Physical Principles of Nanoscale Sci & Eng III1
4
NSCI 230 or 230T – Thermo. and Stat. Mech. of Nanoscale Systems
3
NSCI 20x – Science and Eng. Skills elective
2
AMAT 220 – Linear Algebra
3
AMAT 214 or 214T – Calculus of Several Variables
4
NSCI 220 or 220T – Structure of Matter
3
GE or liberal arts and sciences elective
3
NSCI 20x – Science and Tech. Skills elective
2
GE or liberal arts and sciences elective
3
NSCI 20x – Science and Tech. Skills elective
2
GE or liberal arts and sciences elective
3
 
16
 
16
3
AMAT 314 – Analysis for Applications 1
3
NSCI 3XX – Technical Concentration Course
3
NSCI 3XX – Technical Concentration Course
3
NSCI 360 – Nanoscale Molecular Materials and Soft Matter
3
NSCI 350 – Intro to Quantum Theory for Nanoscale Systems
3
NSCI 305 – Integrated NanoLaboratory II
3
NSCI 300 – Integrated NanoLaboratory I
3
NSCI 390 – Capstone Research I: Intro and Literature Review4
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective
3
GE or liberal arts and science elective (only if not taken in Semester #1)
3
 
18
 
15-18
4
NSCI 410 – Quantum Origins of Material Behavior
3
NSCI 4XX – Technical Concentration Course
3
NSCI 4XX – Technical Concentration Course
3
NSCI 4XX – Elective
3
NSCI 4XX – Elective
3
NSCI 4XX – Elective
3
NSCI 490 – Capstone Research II: Team Research and Project 
Review
3
NSCI 492 or 493 – Capstone Research III: Team Research and Final 
Report II5,6
3
NSCI 498 – Seminar 
1
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective
3
GE or liberal arts and science elective (only if not taken in Semester #2)
3
 
16
 
15-18
1  Satisfies the GE natural science requirement
4   Satisfies GE information literacy requirement
2   May be applied towards GE Social Sciences requirement
5   Satisfies GE upper level writing requirement
3   Satisfies GE lower level writing requirement
6  Satisfies GE oral discourse requirement
 
II.6.4.2 Proposed Nanoscale Science Course Matrix
Table III lists the proposed nanoscale science courses by category. Full catalogue descriptions are given in
Appendix VI.1.  Initially, it is proposed to establish three nanoscale science concentration areas. These
areas are expected to evolve both in the number of concentration areas and the courses available for each
concentration  with  the  evolution  of  the  nanoscale  science  academic  roadmap.   In  this  initial
implementation of the nanoscale science and nanoscale engineering undergraduate degree programs, it is
recommended that the ‘Foundational Principles’ courses be cross-listed as a reflection of the highly
interdisciplinary nature of both programs. 
Table III.  Proposed nanoscale science courses by category.  Full catalogue descriptions are given in
Appendix VI.1.
NSCI Nanotechnology Survey Courses
Credits
NSCI 101
Nanotechnology Survey
3
NSCI 102
Societal Impacts of Nanotechnology
3
NSCI 103
Economic Impacts of Nanotechnology
3
NSCI 104
Disruptive Nanotechnologies
3
Foundational Principles of Nanoscale Science
NSCI 110
Chemical Principles of Nanoscale Science and Engineering I
4
NSCI 112
Chemical Principles of Nanoscale Science and Engineering II
4
NSCI 120
Physical Principles of Nanoscale Science and Engineering I
4
NSCI 122
Physical Principles of Nanoscale Science and Engineering II
4
NSCI 124
Physical Principles of Nanoscale Science and Engineering III 
4
NSCI 124T
Physical Principles of Nanoscale Science and Engineering III (Honors)
4
NSCI 130
Biological Principles of Nanoscale Science and Engineering I
4
NSCI 132
Biological Principles of Nanoscale Science and Engineering II
4
NSCI Science and Technology Skills Courses
NSCI 201
Computer Control of Instrumentation
2
NSCI 202
Introduction to Nanoscale Engineering Design and Manufacturing
2
NSCI 203
Advanced Circuits Laboratory
2
NSCI 204
Finite Element Modeling
2
NSCI 205
Numerical Simulation
2
Core Competencies for Nanoscale Science
NSCI 220
Structure of Matter
3
NSCI 220T
Structure of Matter (Honors)
3
NSCI 230
Thermodynamics & Statistical Mechanics for Nanoscale Systems
3
NSCI 230T
Thermodynamics & Stat. Mechanics for Nanoscale Systems (Honors)
3
NSCI 300
Integrated NanoLaboratory I
3
NSCI 305
Integrated NanoLaboratory II
3
NSCI 350
Introduction to Quantum Theory for Nanoscale Systems
3
NSCI 360
Nanoscale Molecular Materials and Soft Matter
3
NSCI 410
Quantum Origins of Material Behavior
3
NSCI Technical Concentration Courses
Nanoelectronics
NSCI 310
Nanoscale Surfaces and Interfaces
3
NSCI 320
Advanced Physical/Chemical Concepts for Nanoscale Science
3
NSCI 420
Electronic Properties of Nanomaterials
3
21
 
NSCI 421
Nanoscale Electronic Devices
3
NSCI 422
Concepts in Molecular Electronics
3
NSCI 423
Magnetic and Spintronic Materials and Devices
3
NSCI 424
Optoelectronic Materials and Devices
3
Nanostructured Materials
NSCI 310
Nanoscale Surfaces and Interfaces
3
NSCI 320
Advanced Physical/Chemical Concepts for Nanoscale Science
3
NSCI 430
Nanoscale Physical Properties in Reduced Dimensions
3
NSCI 431
Growth of Nanostructured Materials
3
NSCI 432
Particle Induced Chemistry
3
NSCI 433
Properties of Nanoscale Composite Structures
3
NSCI 434
Nanostructural Characterization Techniques
3
Nanobioscience
NSCI 240
Biochemical Principles for Nanoscale Science
3
NSCI 330
Energetics and Kinetics in Nanobiological Systems 
3
NSCI 440
Biological Architectures for Nanotechnology Applications
3
NSCI 441
Nanobiology for Nanotechnology Applications
3
NSCI 442
Nanoscale Bio-Inorganic Interfaces
3
NSCI 443
Biological Routes for Nanomaterials Synthesis
3
Capstone Undergraduate Research in Nanoscale Science
NSCI 390
Capstone Research I: Introduction and Literature Review
3
NSCI 490
Capstone Research II: Team Research and Project Review
3
NSCI 492
Capstone Research III: Team Research and Final Report
3
NSCI493
Capstone Research III: Team Research and Final Report (Honors)
3
Current Topics Courses
NSCI 498
Current Topics in Nanoscale Science and Engineering
1-6
Independent Study and Research Course
CNSE 397
Independent Study and Research
1-6
22
 
II.6.5. Nanoscale Engineering Semester-by-Semester Major Academic Pathway (MAP), Course Matrix, and Catalog Descriptions
II.6.5.1
Table IV.  B.S. in Nanoscale Engineering Semester-by-Semester Major Academic Pathway
(MAP)
Yea
r
Fall
Credit
s
Spring
Credits 
1
NENG/NSCI 110 – Chemical Principles of Nanoscale Sci & Eng I1
4
NENG/NSCI 112 – Chemical Principles of Nanoscale Sci and Eng II1
4
AMAT 112 or 118T – Calculus I
4
AMAT 113 or 119T – Calculus II
4
NENG/NSCI 101 – Nanotechnology Survey1
3
NENG/NSCI 102 – Societal Impacts of Nanotechnology2,3
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective* (optional, must be made up
in semester #6)
3
GE or liberal arts and sciences elective
3
14-17
17
2
NENG/NSCI 120 – Physical Principles of Nanoscale Sci and Eng 
I1
4
NENG/NSCI 122 – Physical Principles of Nanoscale Sci and Eng II1
4
AMAT 214 or 214T – Calculus of Several Variables
4
AMAT 311 – Differential Equations
3
NENG 201 or 201T – Nanoengineering Design 
3
NENG 202 or 202T – Intro to Computer Programming for Engineers
3
GE or liberal arts and sciences elective
3
NENG 203 or 203T – Nanoengineering Electronics 
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective
3
 
17
 
16
3
NENG 301 –Thermodynamics & Kinetics of Nanomaterials
3
NENG 130 – Biological Principles of Nanoscale Sci. and Eng I1
4
NENG 302 – Elec., Opt. and Mag. Props. of Nanomaterials             
3
NENG 304 – Fluid Mechanics and Transport Processes
3
NENG 303 – Mechanics of Nanomaterials
3
NENG 4xx – Concentration Elective
3
GE or liberal arts and sciences elective
3
NENG 390 – Capstone Research I: Intro. and Literature Review4
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective
3
GE or liberal arts and sciences elective* (If not completed in 
Semester #1)
3
 
15-18
 
16
4
NENG 405 – Micro and Nano Mat. Processing Technology
4
NENG 407 – Thin Film and Nanomaterials Characterization
4
NENG 406 – Fundamentals of Nanoelectronics
4
NENG 408 – Industrial Nanomanufacturing
3
NENG 4xx – Concentration Elective
3
NENG 4xx – Concentration Elective
3
NENG/NSCI 4xx – Elective
3
NENG/NSCI 4xx – Elective
3
NENG 490 – Capstone Research II: Team Research and Project 
Review
3
NENG 492 or 493 – Capstone Research III: Team Research and Final 
Report 4,5,6
3
NENG 498 – Seminar
1
 
1 May be applied towards GE natural science requirement
2 Satisfies GE lower level writing requirement
3 Satisfies GE social science requirement
4 Satisfies GE information literacy requirement
5 Satisfies GE oral discourse requirement
6 Satisfies GE upper level writing
23
 
II.6.5.2 Proposed Nanoscale Engineering Courses Matrix by Category
Table V lists proposed nanoscale engineering Courses by category. Full catalogue descriptions are given
in Appendix VI.2.  .  Initially, it is proposed to establish five nanoscale engineering concentration areas.
These areas are expected to evolve both in the number of concentration areas and the courses available for
each concentration with the evolution of the nanoscale engineering academic roadmap.  In this initial
implementation of the nanoscale science and nanoscale engineering undergraduate degree programs, it is
recommended that the ‘Foundational Principles’ courses be cross-listed as a reflection of the highly
interdisciplinary nature of both programs. 
Table V.  Proposed nanoscale science courses by category.  Full catalogue
descriptions are given in Appendix VI.2.
NENG Nanotechnology Survey Courses
Credi
ts
NENG 101
Nanotechnology Survey
3
NENG 102
Societal Impacts of Nanotechnology
3
NENG 103
Economic Impacts of Nanotechnology
3
NENG 104
Disruptive Nanotechnologies
3
Foundational Principles of Nanoscale Engineering
NENG 110
Chemical Principles of Nanoscale Science and Engineering I
4
NENG 112
Chemical Principles of Nanoscale Science and Engineering II
4
NENG 120
Physical Principles of Nanoscale Science and Engineering I
4
NENG 122
Physical Principles of Nanoscale Science and Engineering II
4
NENG 130
Biological Principles of Nanoscale Science and Engineering I
4
NENG Engineering and Design 
NENG 201
Introduction to Nanoengineering Design and Manufacturing
3
NENG 201T
Introduction to Nanoengineering Design and Manufacturing (Honors)
3
NENG 202
Introduction to Computer Programming for Engineers
3
NENG 202T
Introduction to Computer Programming for Engineers (Honors)
3
NENG 203
Introduction to Nanoengineering Electronics
3
NENG 203T
Introduction to Nanoengineering Electronics (Honors)
3
Core Competencies for Nanoscale Engineering
NENG 301
Thermodynamics and Kinetics of Nanomaterials
3
NENG 302
Electronic, Optical and Magnetic Properties of Nanomaterials
3
NENG 303
Mechanics of Nanomaterials
3
NENG 304
Fluid Mechanics and Transport Processes
3
NENG 405
Micro and Nanomaterials Processing Technology
4
NENG 406
Fundamentals of Nanoelectronics
4
NENG 407
Thin Film and Nanomaterials Characterization
4
NENG 408
Industrial Nanomanufacturing 
3
Nanoscale Engineering Concentration Electives
Nanoelectronics
NENG 411
Nanoelectronic IC Fabrication Processes
3
NENG 412
Micro and Nano Devices and Circuits
3
NENG 413
Nanoscale Optical and Optoelectronic Devices
3
NENG 414
Applications of Fields and Waves to Nanoscale Systems
3
24
 
NENG 415
Nanoelectronic Devices
3
Nanoscale Engineering for Energy & Environment Applications
NENG 421
Introduction to Solar Cell Nanotechnology
3
NENG 422
Introduction to Fuel Cell Nanotechnology
3
NENG 423
Renewable & Alternate Energy Nanotechnologies
3
NENG 424
Nanoscale Chemical and Biological Sensors
3
NanoSystems Engineering
NENG 431
Advanced Materials Processing for NEMS/MEMS
4
NENG 432
Interfacial Engineering in Nanobiological Systems
3
NENG 433
NEMS/MEMS for Chemical and Biological Sensors
3
NENG 434
BioMEMS and BioNEMS
3
NENG 435
Nanobiological Systems  
3
Nanoscale Lithography
NENG 441
Nanoscale patterning
3
NENG 442
Light Optics for Nanoengineering
3
NENG 443
Charged Particle Optics for Nanoengineering
3
NENG 444
Electron Beam Pattern Generation
3
Emerging Materials and Device Engineering
NENG 451
Nanophotonics
3
NENG 452
Magnetic Nanostructures
3
NENG 453
Organic Semiconductors
3
NENG 454
Analysis of Thin Film and Interfaces
3
NENG 455
Nanoscale Polymer Science & Engineering
3
NENG 456
Nanoscale Interfacial Engineering
3
NENG 457
Modeling of Nanomaterials and Systems
3
Capstone Undergraduate Research in Nanoscale Engineering
NENG 390
Capstone Research I: Introduction and Literature Review
3
NENG 490
Capstone Research II: Team Research and Project Review
3
NENG 492
Capstone Research III: Team Research and Final Report
3
NENG 493
Capstone Research III: Team Research and Final Report (Honors)
3
Current Topics Courses
NENG 498
Current Topics in Nanoscale Science and Engineering
1-6
Independent Study and Research Course
NNSE 397
Independent Study and Research
1-6
II.6.5.3 Plans for Accreditation of the Proposed B.S. in Nanoscale Engineering 
Although specific criteria to provide an accreditation pathway for baccalaureate programs in Nanoscale
Engineering are in the process of development and formalization, CNSE fully intends to work closely
with the Engineering Accreditation Commission (EAC), the State Education Department, the State
University  of  New  York,  and  other  accreditation  bodies  as  appropriate,  to  implement  a  proper
accreditation process for the newly developed undergraduate program in nanoscale engineering.  CNSE
25
 
will work diligently to develop and implement vigorous academic and scholarly criteria to meet the
requirements of the EAC.
II.6.6 
Honors Program, Honors College, and Nanotechnology Minor
II.6.6.1  Nanoscale Science and Nanoscale Engineering  Honors Programs
Students may apply in the spring of the sophomore year to the honors program in either nanoscale science
or nanoscale engineering.  Applications will be available from the CNSE Student Services Office. The
student must have an earned overall GPA of 3.25, with a GPA of 3.50 for all courses attended in the major
at time of admission to the honors program.  In addition, all applicants to the honors program must
provide as part of the completed application a written statement of purpose which explains the reasons
and motivation for wanting to undertake the honors program.  
Honors Students’ progress in the program will be reviewed every semester by the CNSE Student Services
Office in consultation with the Honors Program Director and the CNSE Assistant Vice President for
Academic Affairs.  Students falling below 3.50 overall and/or 3.25 in the major will be given a written
warning.  The warned student will have one semester in which to raise the GPA to the standard.  If the
student falls below the standard a second time, s/he will be removed from the honors program pending an
appeal.  The appellate procedure for a student who believes they should remain in the program is to
submit a written appeal to the honors director, who will review the appeal with the Assistant Vice
President for Academic Affairs.  The student’s instructors and advisor may be consulted as part of the
appeal process.  A recommendation to continue or remove the student from the honors program will be
made to the Vice President of CNSE by the Honors Director.  The student will be informed of the decision
within ten days of submitting the appeal.  If the appeal is granted, the student must meet the standard the
next semester in either full-time or part-time study or the student will be dropped from the program with
no further appeal.  If the appeal is denied, the student is removed from the honors program, and is
returned to the original nanoscale science or nanoscale engineering program.
When a student who is admitted to the honors program completes all requirements listed below, earns an
overall GPA of 3.25 and a major GPA of 3.50, presents an acceptable honors project or thesis (CNSE 493)
then, upon recommendation of the project advisor and honors director to the Vice President, the Vice
President will direct that the student graduate with “Honors in Nanoscale Science” or “Honors in
Nanoscale Engineering” and that the appropriate designation be placed on the student’s transcript.
Students admitted to the honors program will follow the standard curriculum in nanoscale science
outlined earlier, but will substitute the following honors courses in the curriculum:  NSCI 124H for NSCI
124; NSCI 220H for NSCI 220 ; NSCI 230H for NSCI 230; and the capstone course NSCI 493 for NSCI
492.  Similarly, students admitted to the honors program will follow the standard curriculum in nanoscale
engineering outlined above, but will substitute the following honors courses in the curriculum:  NENG
201H for NENG 201; NENG 202H for NENG 202; NENG 203H for NENG 203; and the capstone course
NENG 493 for NENG 492.
II.6.6.2  Honors College Requirements
UAlbany undergraduate students who are enrolled in the proposed B.S. programs in nanoscale science or
nanoscale engineering have the option and could be encouraged to participate in the UAlbany Honors
College program, depending on specific interest and particular educational pathway.  
To meet the UAlbany Honors College requisite of successful completion of six Honors College courses
during the first two years of enrollment, it is proposed that two sets of three courses each be offered
26
 
within, respectively, the nanoscale science and nanoscale engineering curricula, as outlined below.   These
sets  would  be  combined  with  the  UAlbany  Honors  College  courses  that  are  offered  through  the
Department of Mathematics, namely, AMAT 118H, AMAT 119H, and AMAT 214H to fulfill the six
course requirements.
NSCI 124H.  Physical Principles of Nanoscale Science and Engineering III
NSCI 220H.  Structure of Matter
NSCI 230H.  Thermodynamics and Statistical Mechanics for Nanoscale Systems
NENG 201H.  Introduction to Nanoengineering Design and Manufacturing
NENG 202H.  Introduction to Computer Programming for Engineers
NENG 203H.  Introduction to Nanoengineering Electronics
During their subsequent two years of enrollment in the Honors College, nanoscale science and nanoscale
engineering  students  could  satisfy  their  Honors  College  requirements  through  the  Capstone
Undergraduate Research/Design Project. 
II.6.6.3 Minor in Nanotechnology
In the event students enrolled in the nanoscale science or nanoscale engineering baccalaureate programs
desire, instead, to pursue other majors and degree options, a provision has been established to provide
these students the option to select and complete a minor in nanotechnology.  By allowing students opting
for  other  majors  to  apply  18-24  credits  of  their  completed  NSCI  or  NENG  coursework  to  the
Nanotechnology Minor, this provision will enable a smoother programmatic transition as students will not
be required to restart coursework for a new minor.  This is a restricted minor and students may list it on
their record only with permission from the CNSE Office of Student Services.
Minor  in Nanotechnology: 18-24  credits of  coursework  in  the College of  Nanoscale Science and
Engineering (at least nine credits of which must be in coursework at or above the 300-level or in courses
requiring one or more prerequisites) from courses with an NSCI or NENG prefix.  This is a restricted
minor and a student may list it on their record only with permission from the CNSE Office of Student
Services.
II.6.7 
Student Advising and Career Development
A comprehensive and proactive advisement program, coupled to a flexible assessment system (see
Section II.3. Learning Outcomes and Assessment), is essential to ensuring top academic quality and
scholarly excellence of the CNSE undergraduate programs while best serving the educational and career
interests of its student participants.  Upon enrollment into the proposed CNSE undergraduate programs,
students will be immediately assigned a CNSE academic advisor who is a member of the CNSE teaching
faculty for consultation and scheduling of coursework. All administrative and programmatic actions with
regards to student matters will be coordinated through the CNSE Office of Student Services.  The office is
headed by the CNSE Assistant Vice President for Student Affairs and Director of Student Services, who
reports directly to the CNSE Vice President to ensure that all student related affairs are handled at the
highest levels of awareness and consideration.  
27
 
Periodic communication and evaluation of progress will be implemented for each student and will center
on individual advisor/student interactions to ensure timely completion of the program of study.  Students
will meet with their academic advisors regularly to review progress, solicit guidance, and identify
opportunities for advancement.  Upon completion of the equivalent of 4 semesters of residency within the
CNSE undergraduate programs, each student will be assigned a research advisor for coordination of
research involvement leading to the Capstone Undergraduate Research/Design Project.    As part of this
research training, undergraduate students will be required as early as possible to participate in and
contribute  to  scientific  papers,  technical  reports,  and  presentations  at  national  and  international
conferences, seminars, and symposia.  Furthermore, undergraduate students enrolled in the nanoscale
science and nanoscale engineering programs will be strongly encouraged to participate in onsite and
offsite private sector and government laboratory fellowship and internship programs to develop their
technical expertise, team participation skills, and professional networking abilities.    Throughout the
advisement process, the CNSE academic and research advisors will coordinate their actions with the head
of the appropriate CNSE constellation to ensure the availability of the faculty resources and infrastructure
assets necessary to support the student’s academic and research paths.  This coordination will also involve
the CNSE Office of Student Services and the appropriate UAlbany offices and services, as needed.
Naturally, every student will have access to UAlbany’s student support services for advisement needs
outside the purview of the academic and research advisors or the CNSE Office for Student Services.
III.
ENROLLMENT
CNSE is committed to academically rigorous undergraduate programs serving a diverse student clientele
from  New York State and beyond.   As  such,  the undergraduate  nanoscale science and  nanoscale
engineering curricula proposed will be deployed in a manner that maintains the scholarly excellence,
educational quality, and technical and pedagogical innovation necessary to attract and educate a talented
pool of qualified scientists and engineers at the baccalaureate level.  Accordingly, enrollments are planned
to increase gradually in accordance with the establishment of the critical mass of intellectual assets and
physical infrastructure necessary to ensure full academic and instructional resource management and
logistical support for every student enrolled in the programs. 
Therefore, an undergraduate enrollment of 20 students for each degree will be targeted for the first year of
full implementation of the curricula (tentatively planned for Fall 2009).  As an ongoing expansion of the
instructional and laboratory capacity at the CNSE’s Albany NanoTech is completed in 2009, and a
comprehensive marketing and outreach strategy to qualified high school and two-year institutions is fully
executed, enrollments targets will ramp up as per the schedule presented in Table VI.  It should be noted
that the student populations in the individual programs are not intended to represent a fixed ratio, and are
expected to vary based on student interest and the yearly pool of potential applicants.  
Table  VI.  Targeted  enrollments  in  the  proposed  CNSE  undergraduate
nanoscale science and nanoscale engineering programs.*
Targeted 
Enrollment
**
Fall
2009
Fall
2010
Fall
2011
Fall
2012
Fall
2013
Nanoscale 
Engineering
20
35
70
100
150
Nanoscale 
Science
20
35
70
100
150
Total
40
70
140
200
300
28
 
* Student populations in the individual programs are not intended to represent a fixed ratio, and are expected to
vary based on student interest and the yearly pool of potential applicants.
** Although full program implementation is tentatively planned for Fall 2009, partial instructional activities could
be initiated in Spring 2009 depending on the evolution of the internal and external degree review process.
IV. 
IMPACT OF THE PROPOSED PROGRAMS ON OTHER SUNY
INSTITUTIONS
The CNSE undergraduate curricula are intended to attract and retain the large numbers of qualified
undergraduate students who are presently inaccessible to SUNY and the private institutions of higher
learning in New York State.  This inaccessibility is driven by the lack of the interdisciplinary nanoscale
science and nanoscale engineering degrees that are sought by this rapidly growing sector of the university
clientele, as documented almost invariably by each study, blueprint, report, and analysis published by
every governmental body, corporate organization, academic entity, think tank, and cross-organizational
panel across the globe--including the National Science Foundation, which forecasts the need for more
than two million nanotechnology educated professionals at all employment levels in the U.S. by 2014,
with another five million nanotechnology jobs being required worldwide in support fields and disciplines.
As such, the curricula proposed offer unique educational opportunities that are designed to create a highly
qualified  pool  of future scientists,  engineers, researchers, and  educators  in  the  emerging  fields  of
nanoscale science and nanoscale engineering, while helping train and retrain pertinent sectors of the high
technology workforce in New York State. 
In particular, a key component of the CNSE undergraduate educational strategy is to address the severe
shortage in the availability of qualified pool of engineers in New York and the U.S., particularly in the
emerging discipline of nanoscale engineering.  As pointed out by Dr. Shirley Ann Jackson, current
president of the Rensselaer Polytechnic Institute, in her article entitled “We Can’t Build a Future without
Engineers,”11  “Just when demand for engineers is reaching a critical high, we have fewer bright young
people entering the profession.”  Dr. Jackson went on to state that: “…for more than a century,
engineering has driven our technological advances and economic development.  If we do not take steps to
fill the pipeline with new engineers, the supply of these critical professionals will diminish and the U.S.
will lose its competitive edge.”  
In this context, no similar educational program is currently being offered at any other institution of higher
learning in New York, including the SUNY system.  Instead, a very small number of undergraduate
courses dedicated to nanoscale science or nanoscale engineering is currently being offered at other SUNY
campuses (See Appendix VI.3).  Consequently, the potential negative impacts that might have otherwise
resulted from duplication of programs offered at other SUNY colleges or universities are non-existent in
this case.  To the contrary, it is projected that the undergraduate degrees proposed will have significant
positive direct consequences and beneficial ripple effects at a number of SUNY institutions, from two-
year colleges to university centers.  
From a strategic perspective, the establishment of world-class undergraduate programs in nanoscale
science and nanoscale engineering will further advance the standing and reputation of SUNY as a top
flight university system.  Additionally, the programs will act as an effective pipeline for the graduation of
exceptional scientists and engineers who could serve as highly qualified candidates for a wide array of
science, engineering, and technology graduate programs at SUNY research centers.  Conversely, the
proposed programs will provide an attractive and desirable platform for SUNY community college
11  
S.A. Jackson, We Can’t Build a Future Without Engineers (Times Union, October 22, 2001)  p. A7.
29
 
students who seek more advanced educational and training opportunities in the burgeoning fields of
nanoscale science and nanoscale engineering.  From a programmatic perspective, the undergraduate
curricula proposed do effectively complement the SUNY community colleges currently offering or
contemplating the implementation of 2-year degree programs related to or building on nanotechnology.  A
prime example is the Semiconductor Manufacturing Technology program at Hudson Valley Community
College (HEGIS # 5310).  The proposed undergraduate programs at CNSE will serve as an excellent
option for talented HVCC students in this program desiring to pursue a four-year degree in the various
fields of nanotechnology.
Furthermore, the two programs proposed will provide an effective pathway for the UAlbany CNSE to 
continue building and expanding its long standing educational partnerships with the premier science and
engineering programs at the other three SUNY university centers, particularly at the University at Stony
Brook and the University at Binghamton.  
V. 
FACULTY
The UAlbany CNSE has implemented an aggressive outreach and recruitment program for the
development and expansion of its critical mass of teaching faculty and instructors across its four founding
Constellations,  namely,  Nanoscience,  Nanoengineering,  Nanobioscience,  and  Nanoeconomics.   The
resulting core team of professors and educators will serve as an efficient resource for undergraduate
course instruction, mentoring, academic advisement, and research oversight.  Faculty responsibilities with
respect to undergraduate student advisement are specified in Section II.5.7.  A listing of current CNSE
teaching faculty and instructors who will be participating in the undergraduate degree programs is
presented below, along with their primary CNSE constellation affiliation.
Bakhru, Hassaram
Head, Nanoscience Constellation; Chair, CNSE Faculty Council; Professor of Nanoscience
Research areas: Nanomaterials, solid state physics, ion beam physics, particle solid state interactions
Bergkvist, Magnus
Assistant Professor of Nanobioscience
Research areas: Nanobiotechnology, biosensors, molecular biology
Brainard, Robert
Associate Professor of Nanoscience
Research areas: Photoresists, small molecule and polymer synthesis, reaction mechanisms
Cady, Nathaniel
Assistant Professor of Nanobioscience
Research areas: Nanobiotechnology, biosensors, molecular biology
Carpenter, Michael
Assistant Professor of Nanoengineering
Research areas: Chemical & all-optical sensors, quantum dots, Kelvin probe microanalysis, near field
scanning optical microscopy
Castracane, James
Professor and Head, Nanobioscience Constellation; Director, CATN2
Research  areas:  MEMS/NEMS,  biomedical  instrumentation,  optoelectronics,  interconnects,
metrology development
30
 
Clow, Lawrence
Instructor
Research areas: 200 and 300mm silicon wafer processing, 3-D interconnects, anodic and thermo
compression bonding
Cupoli, Edward
Head, Nanoeconomics Constellation; Professor of Nanoeconomics
Research areas: Economics of nanotechnology, economic forecasting, policy analysis
Denbeaux, Gregory
Assistant Professor of Nanoengineering
Research areas: Microscopy, magnetic materials, lithography
Diebold, Alain
Empire Innovation Professor of Nanoscale Science
Research  Areas:  Nanoscale  metrology  and  materials  science;  materials  characterization  at  the
nanoscale; semiconductor metrology and characterization
Dunn, Kathleen
Assistant Professor of Nanoscience
Research areas: Electron microscopy, ion microscopy liners, metallization, defects in metals, ultrafine
wires
Efstathiadis, Harry
Instructor
Research areas: Film depositions, plasma process and residual gas analysis, thin film characterization,
microstructure of carbon & silicon amorphous materials, hydrogen bonded systems
Eisenbraun, Eric
Associate Professor of Nanoscience
Research areas: Thin films, ALD, CVD, metallization, barriers, interconnects, gate stack, metals
Elter, John
Empire Innovation Professor of Nanoscale Engineering; Director, Center for Sustainable Ecosystems
Technologies
Research areas: Environmentally-friendly energy alternatives, advanced fuel cells, next generation
power sources
Fancher, Michael
Director of Economic Outreach; Associate Professor of Nanoeconomics
Research areas: Alternative technology partnership models, regional innovation plans, strategies for
industry, government and academic partnerships
Gadre, Anand
Assistant Professor of Nanobioscience
Research  areas:  MEMS,  bioMEMS,  polymeric  LED  and  biofluidic-transdermal  microsystems,
microsensors, conducting polymers, rechargeable batteries
Geer, Robert
Associate Vice President for Academic Affairs; Professor of Nanoscience
31
 
Research areas: Nanomechanical and nano-optical metrology, planarization processing, molecular
self-assembly, scanning probe microscopy
Groves, Timothy
Empire  Innovation  Professor  of  Nanoscale  Science;  Director,  Center  for  Nanolithography
Development
Research areas: Electron beam physics, particle beam optics, nanoscale electron beam lithography
Haldar, Pradeep
Head, Nanoengineering Constellation; Professor of Nanoengineering
Research  areas:  Advanced  photovoltaics,  advanced  fuel  cells,  next  generation  superconductors,
advanced power electronics
Hartley, John
Professor of Nanoengineering; Director, Advanced Lithography Center
Research areas: Electron beam lithography, system engineering
Huang, Mengbing
Associate Professor of Nanoscience
Research areas: Rare-earth doped systems for photonic and optoelectronic applications, ion beam
interactions with advanced materials
Kaloyeros, Alain
Vice President and Chief Administrative Officer; Professor of Nanoscience
Research areas: Nanoelectronics, nanobiotechnology
LaBella, Vincent
Associate Professor of Nanoscience
Research areas: Spintronics, surface science, ballistic transport
Lee, Ji Ung
Empire Innovation Professor of Nanoscale Engineering
Research areas: Carbon nanotube electronics, amorphous silicon devices, vacuum microelectronics,
superconductivity
Levine, Ernest
Professor of Nanoscience
Research areas: Cu and low k BEOL, electromigration, thermal voids
Lifshin, Eric
Professor of Nanoscience; Director, Metrology & Electron Imaging Facilities; Director, Center for
Advanced Interconnect Science & Technology (CAIST)
Research areas: Scanning electron microscopy, X-ray microanalysis, materials characterization
Matyi, Richard
Professor of Nanoscience
Research areas: High resolution X-ray diffractometry and reflectometry, ion beam processing and
plasma-source ion implantation, molecular beam epitaxy growth
Moore, Richard
32
 
Manager of Analytical Facilities; Senior Scientist; Instructor
Research  areas:  Vacuum  technology,  surface  analysis,  nanoscale  metrology,  spectroscopy  and
microscopy, materials characterization
Murray, Thomas
Instructor
Research areas: Materials characterization by electron and ion beam methods
Oktyabrsky, Serge
Associate Professor of Nanoscience
Research areas: Compound semiconductors, photonics, electronics
Rane, Manisha
Instructor
Research areas: Synthesis and characterization of magnetic-property nanoparticles, high temperature
corrosion studies & themochemistry, fuel cells
Raynolds, James
Assistant Professor of Nanoscience
Research areas: Spintronics, density functional theory, high-performance computing, photonics
Rodriguez, Miguel
Instructor
Research areas: Electron & ion microscopy, liners, TEM, SEM, FIB, EELS
Ryan, James
Associate Vice President of Technology; Professor of Nanoscience
Research areas: Interconnect technology, semiconductor technology, radiation hard nanoelectronics
Schultz, Laura
Assistant Professor of Nanoeconomics
Research areas: R&D investment, R&D collaborations, intangible capital
Shahedipour-Sandvik, Fatemeh (Shadi)
Assistant Professor of Nanoengineering
Research areas: Optoelectronics, wide bandgap III-Nitride semiconductor materials and devices,
metalorganic chemical vapor deposition technique
Thiel, Bradley
Associate Professor of Nanoscience
Research areas: Low vacuum scanning electron microscopy, critical dimension SEM metrology, ion-
solid interactions, protein elastomers
Tokranov, Vadim
Instructor
Research areas: Optoelectronics, molecular beam epitaxy and nanotechnology
Tokranova, Natalya
Instructor
Research areas: MEMS, NEMS, optoelectronics, porous and hybrid materials
33
 
Xie, Yubing
Assistant Professor of Nanobioscience
Research  areas:  Stem  cell  biology,  chemical  and  biomolecular  engineering,  cellular  and  tissue
engineering
Xu, Bai
Assistant Professor of Nanobioscience
Research areas: MEMS, nanobiotechnology, nanomedicine, 3D interconnects
Xue, Yongqiang (Alex)
Assistant Professor of Nanoscience
Research areas: Theoretical nanoscience and computational nanotechnology
34
 
APPENDIX VI.1
NANOSCALE SCIENCE COURSE CATALOGUE DESCRIPTIONS
NSCI 101 (=NENG101) Nanotechnology Survey  (3)
Introduction to the definitions, principles and applications of nanotechnology. Discussion of emergent
nanoscale properties, atomic and molecular self-assembly and concepts of bottom-up and top-down
processing and fabrication. Introduction to selected nanoscale systems, including quantum dots, carbon
nanotubes, and graphene.  Only one of NSCI 101 or NENG 101 may be taken for credit.
NSCI 102 (=NENG102) Societal Impacts of Nanotechnology  (3)
Introduction to the societal implications of nanotechnology innovation including public perception of
nanotechnology, public impacts nanomaterials risk assessment, and impacts of nanotechnology on public
health policy and energy/environmental sustainability. Only one of NSCI 102 or NENG 102 may be taken
for credit.
NSCI 103 (=NENG103) Economic Impacts of Nanotechnology  (3)
Introduction to the economic impacts of nanotechnology innovation. Basic economic principles will be
presented and discussed in terms of emerging nanotechnologies. Topics will include economics of
nanoelectronics;  nanoscale  technologies  for  energy  and  the  environment;  and  nanobioscience/
nanobioengineering. Only one of NSCI 103 or NENG 103 may be taken for credit.
NSCI 104 (=NENG104) Disruptive Nanotechnologies  (3)
Introduction to the concepts of disruptive technologies and specific nanotechnological applications. Case
studies examining key examples of nanoscale science and nanoscale engineering innovation and their
impact on specific technical fields, applications, and product markets. Only one of NSCI 104 or NENG
104 may be taken for credit.
 
NSCI 110 (=NENG110) Chemical Principles of Nanoscale Science and Engineering I  (4)
Fundamental chemical principles for nanoscale materials and systems. Basic chemical concepts of energy,
enthalpy, thermodynamics, and quantum atomic theory are introduced with a focus on application to
nanoscale  materials  and  application  architectures.  Fundamentals  of  chemical  bonding  in  nanoscale
materials (covalent, ionic).  Only one of NSCI 110 or NENG 110 may be taken for credit. Prerequisites:
Four years of high school science (earth science, biology, chemistry and physics), and mathematics
through pre-calculus, or equivalent.
NSCI 112 (=NENG112) Chemical Principles of Nanoscale Science and Engineering II  (4)
Introduces concepts of gas law, phases, equilibrium, and rates of reaction, applicable to nanoscale
systems. Further development of the concepts and nature of chemical bonding. Application of chemical
principles to the structure of matter, molecular materials, and crystals. Only one of NSCI 112 or NENG
112 may be taken for credit.  Prerequisite: satisfactory completion of NSCI/NENG 110 or permission of
instructor.
NSCI 120 (=NENG120) Physical Principles of Nanoscale Science and Engineering I  (4)
Newtonian mechanics, motion, momentum, work-energy equivalence as applied to nanoscale materials
and systems. Includes static, dynamics, and mechanics of bulk and nanoscale materials. Laboratory
section included. Only one of NSCI 120 or NENG 120 may be taken for credit.  Prerequisite: satisfactory
completion of NSCI/NENG 112 or permission of instructor.
35
 
NSCI 122 (=NENG122) Physical Principles of Nanoscale Science and Engineering II  (4)
Concepts of charge, electrostatic potential, current, and fields relevant to nanoscale materials, devices,
and systems. Electrical properties of bulk and nanoscale metals, semiconductors and insulators. RCL
circuit behavior. Lorentz force and application to nanoscale systems and materials. Laboratory section
included. Only one of NSCI 122 or NENG 122 may be taken for credit. Prerequisite: satisfactory
completion NSCI/NENG 120.
NSCI 124 (=NENG124) Physical Principles of Nanoscale Science and Engineering III  (4)
Formalism of vibratory phenomena (waves, oscillators, complex response functions) and scattering
(including diffraction) as applied to nanoscale materials and systems. Wave nature of matter, DeBroglie
hypothesis, fundamental the double slit experiment, electron diffraction, modern physics. Laboratory
section included. Only one of NSCI 124, NENG 124, NSCI 124T, or NENG 124T may be taken for
credit.  Prerequisite: satisfactory completion of NSCI/NENG 120 or NSCI/NENG 122.
NSCI 124T (=NENG124T) Physical Principles of Nanoscale Science and Engineering III 
(Honors)  (4)
Honors version of NSCI/NENG 124. Same topics as NSCI 124 but topics are covered in greater depth.
This course is for students with greater than average ability and background in Nanoscale Science. NSCI
124T substitutes for NSCI 124 toward the prerequisite in any course. Only one of NSCI 124, NENG 124,
NSCI 124T, or NENG 124T may be taken for credit. Prerequisite: Admission to the CNSE honors
program and satisfactory completion of NSCI/NENG 120 or NSCI/NENG 122.
NSCI 130 (=NENG130) Biological Principles of Nanoscale Science and Engineering I  (4)
This course will introduce basic concepts in nanobiology. The course will initially focus on fundamental
biological  principles  such  as  DNA/RNA synthesis  and  replication,  protein  synthesis,  and  cellular
structure/function. Only one of NSCI 130 or NENG 130 may be taken for credit. Prerequisite: satisfactory
completion of NSCI/NENG 120 or NSCI/NENG 122.
NSCI 132 (=NENG132) Biological Principles of Nanoscale Science and Engineering II  (4)
The course will cover topics relating to the interface between nanosystems and biological systems. This
will include general information about biomimetic systems and the uses of nanotechnology for biological
research. Only one of NSCI 132 or NENG 132 may be taken for credit. Prerequisite: satisfactory
completion of NSCI/NENG 130.  
NSCI 201 Computer Control of Instrumentation  (2)
Introduction to computer-based automation and control for instrumentation. This course will focus on the
use of software (e.g., LabView) and interface cards for controlling processing and analytical tools as well
as customized configuration of multiple pieces of equipment for integrated experimental data acquisition
and analysis. Prerequisites: satisfactory completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG
120, NSCI/NENG 122, AMAT 112 or 118T, and AMAT 113 or 119T, or equivalent.
NSCI 202 Introduction to Nanoscale Engineering Design and Manufacturing  (2)
Develops students' competence and self-confidence as nanodesign scientists. Emphasis on the creative
design process bolstered by application of physical laws, design software (CAD) and learning to complete
projects on schedule and within budget. Lecture topics include idea generation, estimation, concept
selection, visual thinking and communication, kinematics of mechanisms, machine elements, design for
manufacturing, basic electronics, and professional responsibilities and ethics. Prerequisites: satisfactory
completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122, AMAT 112 or
118T, and AMAT 113 or 119T, or equivalent.
36
 
NSCI 203 Advanced Circuits Laboratory  (2)
Introductory  subject that provides the  knowledge necessary for reading schematics and  designing,
building,  analyzing,  and  testing  fundamental  analog  and  digital  circuits.  Interactive  examples  and
exploring the practical uses of electronics in engineering and experimental science, including signals and
measurement fundamentals. Students have the use of state-of-the-art hardware and software for data
acquisition,  analysis,  and  control.  Prerequisites:  satisfactory  completion  of  NSCI/NENG  110,
NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122, AMAT 112 or 118T, and AMAT 113 or 119T, or
equivalent.
NSCI 204 Finite Element Modeling  (2)
Introduction to principles of finite element modeling and utilization of standard commercial software
packages (MATLAB, Intellisuite, ANSYS) for modeling of mechanical, transport, and electromagnetic
response of nanoscale systems.  Prerequisites: satisfactory completion of NSCI/NENG 110, NSCI/NENG
112, NSCI/NENG 120, NSCI/NENG 122, AMAT 112 or 118T, and AMAT 113 or 119T, or equivalent.
NSCI 205 Numerical Simulation  (2)
Introduction to standard numerical simulation approaches for nanoscale materials, system and devices
using custom and commercial packages. Topics will include direct numerical calculation, simulators and
field solvers in addition to statistical (Monte Carlo) approaches for materials analysis. Prerequisites:
satisfactory completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122,
AMAT 112 or 118T, and AMAT 113 or 119T, or equivalent.
NSCI 220 Structure of Matter  (3)
Course focusing on the chemical bonding and symmetry of clusters, crystal lattices, amorphous materials
and organized molecular structures. Emphasis will also be placed on various concepts, constructs, and
techniques for characterizing nanoscale structures including the structure factor, diffraction, and the radial
distribution function. Prerequisites: satisfactory completion of NSCI/NENG 110, NSCI/NENG 112,
NSCI/NENG 120, NSCI/NENG 122, AMAT 112 or 118T, and AMAT 113 or 119T, or equivalent.
NSCI 220T Structure of Matter (Honors) (3)
Honors version of NSCI 220. Same topics as NSCI 220 but topics are covered in greater depth. This
course is for students with greater than average ability and background in Nanoscale Science. NSCI 220T
substitutes for NSCI 220 toward the prerequisite in any course. Only one of NSCI 220 and NSCI 220T
may be taken for credit. Prerequisites: admission to the nanoscience honors program and satisfactory
completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122, AMAT 112 or
118T, and AMAT 113 or 119T, or equivalent.
NSCI 230 Thermodynamics and Statistical Mechanics for Nanoscale Systems  (3)
Applications of thermodynamics and Statistical Mechanics to nanoscale materials and systems with an
emphasis on the laws of thermodynamics, phase equilibria, chemical potential, Gibbs-Duhem relation,
Boltzman,  Fermi-Dirac,  and  Bose-Einstein  distribution  functions,  ensemble  behavior. Prerequisites:
satisfactory completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122,
AMAT 112 or 118T, and AMAT 113 or 119T, or equivalent.
NSCI 230T Thermodynamics and Statistical Mechanics for Nanoscale Systems (Honors) (3)
Honors version of NSCI 230. Same topics as NSCI 220 but topics are covered in greater depth. This
course is for students with greater than average ability and background in Nanoscale Science. NSCI 230T
substitutes for NSCI 230 toward the prerequisite in any course. Only one of NSCI 230 and NSCI 230T
may be taken for credit. Prerequisites: admission to the nanoscience honors program  and satisfactory
completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122, AMAT 112 or
118T, and AMAT 113 or 119T, or equivalent.
37
 
NSCI 240 Biochemical Principles for Nanoscale Science  (3)
This course will cover basic chemical concepts of chemical/biological signaling, surface binding, and
selectivity. The course will also focus on chemical interactions at gas, fluid, and solid interfaces for
nanobiosystems. Includes laboratory section.  Prerequisites: admission to the nanoscience honors program
and satisfactory completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120, NSCI/NENG 122,
AMAT 112 or 118T, and AMAT 113 or 119T, or equivalent.
NSCI 300 Integrated Laboratory I  (3)
Advanced laboratory training for undergraduates. This laboratory will promote hands-on use of advanced
CNSE processing, characterization, and integration laboratories including selected toolsets for 200mm
and  300mm  wafer  design,  fabrication,  processing  and  metrology.  Course  will  focus  on  operating
principles of selected processing, testing, and metrology tools.  Prerequisites: satisfactory completion of
required NSCI 220 or 220T, NSCI 230 or 230T and AMAT 220.
NSCI 305 Integrated Laboratory II  (3)
Advanced laboratory training for undergraduates. This laboratory will promote hands-on use of advanced
CNSE processing, characterization, and integration laboratories including selected toolsets for 200mm
and 300mm wafer design, fabrication, processing and metrology. Course will focus on integration of
processing, fabrication, and metrology tools for construction, analysis, and testing of device structures.
Prerequisites: satisfactory completion of NSCI 300 and permission of instructor.
NSCI 310 Nanoscale Surfaces and Interfaces  (3)
Structure of surfaces and interfaces at the nanometer length scale. Diffusion, adsorption, chemisorption,
and physisorption of atomic and molecular species at surfaces and interfaces. Overview of analytic
approaches  for  surface  and  interfacial  characterization  and  metrology. Prerequisites:  satisfactory
completion of NSCI 220, or 220T, and NSCI 230 and NSCI 230T.
NSCI 320 Advanced Physical/Chemical Concepts for Nanoscale Science  (3)
Advanced course focusing on physical/chemical concepts and their application to nanoscale materials and
systems. Topics will include advanced treatment of energy levels, orbital theory, spectroscopy, phase
transformations, kinetics, and diffusion. Prerequisites: satisfactory completion of NSCI 220, or 220T, and
NSCI 230 and NSCI 230T.
NSCI 330 Energetics and Kinetics in Nanobiological Systems  (3)
For this course, energy transduction, kinetics, and transport for nanobiological systems will be explored at
an  advanced  level.  Topics  covered  will  include  oxidation/reduction  pathways,  electron  transport,
chemical/electrical  gradients,  energy  transduction  and  basic  biochemical  kinetics.  Prerequisites:
satisfactory completion of NSCI 220, or NSCI 220T, and NSCI 230 and NSCI 230T.
NSCI 350 Introduction to Quantum Theory for Nanoscale Systems  (3)
Introduction to Solid State Quantum Theory for Nanoscale Systems. Fundamental quantum mechanical
formalisms applicable to solid state materials. Solution of Schrödinger equation for period potentials and
application  to  nanoscale  phenomena,  such  as  tunneling  and  localization. Prerequisites:  satisfactory
completion of NSCI 220, or NSCI 220T, and NSCI 230 and NSCI 230T.
NSCI 360 Nanoscale Molecular Materials and Soft Matter  (3)
Structure-property relations and chemistry of synthetic polymers, biological macromolecules, gels, foams,
emulsions and colloids. Prerequisites: satisfactory completion of NSCI 300 and NSCI 350.
38
 
NSCI 390 Capstone Research I.  Introduction and Literature Review  (3)
First course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research. During this
introductory course the student will work with a CNSE research team to investigate and identify a topical
research problem of interest to the wide fields of Nanoscale Science and Engineering. Emphasis will be
placed on a functional understanding of the current technical, peer-reviewed literature in the area of
interest and the drafting of a coherent research plan with relevant proof-of-concept research results.
Prerequisite: Permission of instructor and satisfactory completion of NSCI 300 and NSCI 350.
NSCI 410 Quantum Origins of Material Properties  (3)
This course will focus on the quantum properties of a variety of materials systems and how these
properties govern bulk and nanoscale material characteristics. Topics will focus on discrete energy levels
and orbital theory and relation to spectroscopy, material phase transformations and kinetics. Prerequisite:
satisfactory completion of NSCI 300, and NSCI 305, and NSCI 360.
NSCI 420 Electronic Properties of Nanomaterials  (3)
Electron transport in metals, properties of dielectric materials including insulators and semiconductors.
Topics include electron energies in solids, the statistical physics of carrier concentration and motion in
crystals,  and  energy  band  models  in  silicon  and  well  as  compound  semiconductors.  Prerequisite:
satisfactory completion of NSCI 300, and NSCI 305, and NSCI 360.
NSCI 421 Nanoscale Electronic Devices  (3)
This course will focus on nanoscale device and device geometries based on semiconductor materials.
Topics include  drift and diffusion currents, recombination-generation of carriers, continuity equations,
and the p-n junction under equilibrium and bias conditions, and metal-semiconductor Schottky and ohmic
contacts. Non-idealities associated with real diodes are introduced. Prerequisite: satisfactory completion
of NSCI 300, and NCSI 305, and NSCI 360.
NSCI 422 Concepts in Molecular Electronics  (3)
This course will focus on nanoelectronic materials based on individual molecules or nanoscale molecular
assemblies. Will examine electronic polymers, carbon nanotubes, molecular wires, and discuss aspects of
electronic band structure and carrier densities, and charge transport in 1-dimensional covalently bonded
materials. Prerequisite: satisfactory completion of NSCI 300, and NCSI 305, and NSCI 360.
NSCI 423 Magnetic and Spintronic Materials and Devices  (3)
Introduction to magnetic materials and nanoscale structures for spintronic manipulation. This course will
focus on the fundamental science of magnetism and local electron spin manipulation, transport and
coupling. Devices based on the addition of the spin degree of freedom to conventional charge-based
electronic devices, such as Spin-FET will be discussed. Prerequisite: satisfactory completion of NSCI
300, and NSCI 305, and NSCI 360.
NSCI 424 Optoelectronic Materials and Devices  (3)
Introduction to semiconductor optoelectronic materials for optoelectronic applications.  This course will
cover topics including design, operating principles and practical device features. Review of relevant
semiconductor physics, optical processes in semiconductors, waveguides, and microcavities will be
discussed.  Operational principals of light emitting diodes and lasers, photodetectors, and solar cells will
be introduced. Prerequisite: satisfactory completion of NSCI 300, and NCSI 305, and NSCI 360.
39
 
NSCI 430 Nanoscale Physical Properties in Reduced Dimensions  (3)
Origin of electrical, optical, and thermomechanical properties in two-, one- and zero dimensional systems,
including thin films, graphene, carbon nanotubes, nanowires, and quantum dots. Prerequisite: satisfactory
completion of NSCI 300, and NSCI 305, and NSCI 360.
NSCI 431 Growth of Nanostructured Materials  (3)
Nucleation and growth in confined systems, growth of carbon nanotubes, plasma and thermally assisted
deposition processes, nature of plasmas. Prerequisite: satisfactory completion of NSCI 300, and NSCI
305, and NSCI 360.
NSCI 432 Particle Induced Chemistry  (3)
Processing materials with nanometer-scale resolution using energetic particle beams. Topics include EUV
lithography, electron beam lithography, and electron- and ion-beam induced etching and deposition from
precursors. Prerequisites: satisfactory completion of NSCI 300, and NSCI 305, and NSCI 360.
NSCI 433 Properties of Nanoscale Composite Structures  (3)
Introduction  to  mechanical,  electronic,  magnetic,  and  optical  properties  of  nanoscale  composite
structures.  Topics  will  include  multilayer  composites,  nanoparticle  composites,  porous  media,  and
biomaterial composites. Prerequisites: satisfactory completion of NSCI 300, and NSCI 305, and NSCI
360.
NSCI 434 Nanostructural Characterization Techniques   (3)
Current  methods of directly  examining  the  nanostructure of materials.  Topics: optical microscopy,
scanning  electron  and  focused  ion  beam  microscopy,  field  ion  microscopy,  transmission  electron
microscopy, scanning probe microscopy, and microanalytical surface science methods. Emphasis is on the
electron-optical techniques. Prerequisites: satisfactory completion of NSCI 300, and CNSI 305, and NSCI
360.
NSCI 440 Biological Architectures for Nanotechnology Applications  (3)
Concepts  of  structure,  function  and  self-assembly  in  biological  systems  and  their  applications  in
nanotechnology. Topics include structure and function of biological macromolecules, self-assembly of
these  molecules,  and  their  use  for  nanofabrication  and  other  nanoscale  applications.  Prerequisites:
satisfactory completion of NSCI 300, and CNSI 305, and NSCI 360.
NSCI 441 Nanobiology for Nanotechnology Applications  (3)
The course will provide an understanding of how structure, functionality, energy transduction and kinetic
properties of biological systems can be applied to nanotechnology. Topics will include biosensors, bio-
MEMS/NEMS,  biomolecular  electronics,  energy  production,  or  other  nanobiological  systems.
Prerequisites: satisfactory completion of NSCI 300, and CNSI 305, and NSCI 360.
NSCI 442 Nanoscale Bio-Inorganic Interfaces  (3)
This course will introduce fundamental concepts for interfacial dynamics in nanobiosystems. Biological
and  chemical  interactions  with  nanomaterials  will  be  explored,  as  well  as  advanced  concepts  of
chemical/biological signaling, surface binding, and selectivity. Biological-inorganic interfaces will be
explored including novel approaches for material characterization and integration in nanoscale and
microscale devices. Prerequisites: satisfactory completion of NSCI 300, and CNSI 305, and NSCI 360.
NSCI 443 Biological Routes for Nanomaterials Synthesis  (3)
Applications of biological synthesis routes for nanomaterials fabrication. Emphasis will be placed on
adaptation of genetic and biochemical routes for the production of tailored materials for molecular self-
40
 
assembly or nanoscale interfacial engineering. Prerequisites: satisfactory completion of NSCI 300, and
CNSI 305, and NSCI 360.
NSCI 490 Capstone Research II.  Team Research and Project Review  (3)
Second course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research.  During this
intermediate course the student will report progress of the CNSE research team in the designated project
area focusing on the student’s efforts and results. This ‘project review’ will conform to prevailing formats
and reporting structures for profession-level industry or government-funded research to introduce the
student to professional research management. Emphasis will be placed on implementation of the student’s
research plan and reporting of progress or challenges encountered. Prerequisites: satisfactory completion
of NSCI 300, and CNSI 305, and NSCI 360. 
NSCI 492 Capstone Research III.  Team Research and Final Report  (3)
Third course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research. During this final
course the student will provide a final report on the research project with an emphasis placed on
achievement of the initial goals of the study as well as challenges encountered and lessons learned.
Prerequisite: permission of instructor.
NSCI 493 Capstone Research III.  Team Research and Final Report (Honors)  (3)
Third course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research. During this final
course the student will provide a final report on the research project with an emphasis placed on
achievement of the initial goals of the study as well as challenges encountered and lessons learned.
Prerequisite: permission of CNSE Honors Director.
NSCI 498 Current Topics in Nanoscale Science and Engineering  (1-6)
Seminar course for upper-level undergraduate students. Students will receive individualized instruction
regarding literature review on topics relevant to student’s capstone research and concentration areas.
Prerequisite: permission of instructor.
41
 
APPENDIX VI.2
NANOSCALE ENGINEERING COURSE CATALOGUE DESCRIPTIONS
NENG 101 (=NSCI 101)  Nanotechnology Survey  (3)
Introduction to the definitions, principles and applications of nanotechnology. Discussion of emergent
nanoscale properties, atomic and molecular self-assembly and concepts of bottom-up and top-down
processing and fabrication. Introduction to selected nanoscale systems, including quantum dots, carbon
nanotubes, and graphene.  Only one of NSCI 101 or NENG 101 may be taken for credit.
NENG 102 (=NSCI 102) Societal Impacts of Nanotechnology  (3)
Introduction to the societal implications of nanotechnology innovation including public perception of
nanotechnology, public impacts nanomaterials risk assessment, and impacts of nanotechnology on public
health policy and energy/environmental sustainability. Only one of NSCI 102 or NENG 102 may be taken
for credit.
NENG 103 (=NSCI 103) Economic Impacts of Nanotechnology   (3)
Introduction to the economic impacts of nanotechnology innovation. Basic economic principles will be
presented and discussed in terms of emerging nanotechnologies. Topics will include economics of
nanoelectronics;  nanoscale  technologies  for  energy  and  the  environment;  and
nanobioscience/nanobioengineering. Only one of NSCI 103 or NENG 103 may be taken for credit.
NENG 104 (=NSCI 104)Disruptive Nanotechnologies  (3)
Introduction to the concepts of disruptive technologies and specific nanotechnological applications. Case
studies examining key examples of nanoscale science and nanoscale engineering innovation and their
impact on specific technical fields, applications, and product markets.  Only one of NSCI 104 or NENG
104 may be taken for credit.
NENG 110 (=NSCI 110)Chemical Principles of Nanoscale Science and Engineering I   (4)
Fundamental chemical principles for nanoscale materials and systems. Basic chemical concepts of energy,
enthalpy, thermodynamics, and quantum atomic theory are introduced with a focus on application to
nanoscale  materials  and  application  architectures.  Fundamentals  of  chemical  bonding  in  nanoscale
materials (covalent, ionic). Laboratory section included. Only one of NSCI 110 or NENG 110 may be
taken for credit. Prerequisites:  Four years of high school science (earth science, biology, chemistry and
physics), and mathematics through pre-calculus.
NENG 112 (=NSCI 112) Chemical Principles of Nanoscale Science and Engineering II  (4)
Introduces concepts of gas law, phases, equilibrium, and rates of reaction, applicable to nanoscale
systems. Further development of the concepts and nature of chemical bonding. Application of chemical
principles to the structure of matter, molecular materials, and crystals. Laboratory section included.  Only
one of NSCI 112 or NENG 112 may be taken for credit. Prerequisites:  Four years of high school science
(earth science, biology, chemistry and physics), and mathematics through pre-calculus.
NENG 120 (=NSCI 120) Physical Principles of Nanoscale Science and Engineering I  (4)
Newtonian mechanics, motion, momentum, work-energy equivalence as applied to nanoscale materials
and systems. Includes static, dynamics, and mechanics of bulk and nanoscale materials. Laboratory
section included. Only one of NSCI 120 or NENG 120 may be taken for credit. Prerequisites:  Four years
of high school science (earth science, biology, chemistry and physics), and mathematics through pre-
calculus.
42
 
NENG 122 (=NSCI 122) Physical Principles of Nanoscale Science and Engineering II  (4)
Concepts of charge, electrostatic potential, current, and fields relevant to nanoscale materials, devices,
and systems. Electrical properties of bulk and nanoscale metals, semiconductors and insulators. RCL
circuit behavior. Lorentz force and application to nanoscale systems and materials. Laboratory section
included. Only one of NSCI 122 or NENG 122 may be taken for credit. Prerequisite: satisfactory
completion of NSCI/NENG 120.
NENG 124 (=NSCI 124) Physical Principles of Nanoscale Science and Engineering III  (4)
Formalism of vibratory phenomena (waves, oscillators, complex response functions) and scattering
(including diffraction) as applied to nanoscale materials and systems. Wave nature of matter, DeBroglie
hypothesis, fundamental the double slit experiment, electron diffraction, modern physics. Laboratory
section included. Only one of NSCI 124 or NENG 124 may be taken for credit. Prerequisite: satisfactory
completion of NSCI/NENG 122.
NENG 130 (=NSCI 130) Biological Principles of Nanoscale Science and Engineering I  (4)
This course will introduce basic concepts in nanobiology. The course will initially focus on fundamental
biological  principles  such  as  DNA/RNA synthesis  and  replication,  protein  synthesis,  and  cellular
structure/function.  Only one of NSCI 130 or NENG 130 may be taken for credit. Prerequisites:
satisfactory completion of NSCI/NENG 110, NSCI/NENG 112, NSCI/NENG 120 and NSCI/NENG 122.
NENG 132 (=NSCI 132) Biological Principles of Nanoscale Science and Engineering II  (4)
The course will cover topics relating to the interface between nanosystems and biological systems. This
will include general information about biomimetic systems and the uses of nanotechnology for biological
research. Only one of NSCI 132 or NENG 132 may be taken for credit. Prerequisite: satisfactory
completion of NSCI/NENG 130.
NENG 201 Introduction to Nanoengineering Design and Manufacturing  (3)
Develops students' competence and self-confidence as nanodesign engineers. Emphasis on the creative
design process bolstered by application of physical laws, design software (CAD) and learning to complete
projects on schedule and within budget. Synthesis, analysis, design robustness and manufacturability are
emphasized. Subject relies on active learning via a major design-and-build project. Lecture topics include
idea  generation,  estimation,  concept  selection,  visual  thinking  and  communication,  kinematics  of
mechanisms,  machine  elements,  design  for  manufacturing,  basic  electronics,  and  professional
responsibilities and ethics. Prerequisites:  satisfactory completion of NSCI/NENG 110 and NSCI/NENG
120.
NENG 201T Introduction to Nanoengineering Design and Manufacturing (Honors) (3)
Honors version of NENG 201. Same topics as NENG 201 but topics are covered in greater depth. This
course is for students with greater than average ability and background in Nanoscale Science. Only one of
NENG 201 and NENG 201T may be taken for credit.  Prerequisites: admission to the Nanoscale
engineering honors program and satisfactory completion of NSCI/NENG 110 and NSCI/NENG 120.
NENG 201T substitutes for NENG 201 toward the prerequisite in any course.
NENG 202 Introduction to Computer Programming for Engineers  (3)
Program and how to use computational techniques to solve nanoengineering problems. Topics include
algorithms, simulation techniques, and use of software libraries. Prerequisites: satisfactory completion of
NSCI/NENG 110 and NSCI/NENG 120.
NENG 202T Introduction to Computer Programming for Engineers (Honors) (3)
Honors version of NENG 202. Same topics as NENG 202 but topics are covered in greater depth. This
course is for students with greater than average ability and background in Nanoscale Science.  Only one
43
 
of NENG 202 and NENG 202T may be taken for credit.  Prerequisites: admission to the Nanoscale
Engineering honors program and satisfactory completion of NSCI/NENG 110 and NSCI/NENG 120.
NENG 202T substitutes for NENG 202 toward the prerequisite in any course. 
NENG 203 Introduction to Nanoengineering Electronics   (3)
Introductory  subject that provides the  knowledge necessary for reading schematics and  designing,
building,  analyzing,  and  testing  fundamental  analog  and  digital  circuits.  Interactive  examples  and
exploring the practical uses of electronics in engineering and experimental science, including signals and
measurement fundamentals. Students have the use of state-of-the-art hardware and software for data
acquisition, analysis, and control. Prerequisites: satisfactory completion of NENG 201 or NENG 201T. 
NENG 203T Introduction to Nanoengineering Electronics  (Honors)  (3)
Honors version of NENG 203. Same topics as NENG 203 but topics are covered in greater depth. This
course is for students with greater than average ability and background in Nanoscale Science. Only one of
NENG 203 and NENG 203T may be taken for credit.  Prerequisites: admission to the Nanoscale
Engineering honors program and satisfactory completion of NENG 201 or NENG 201T. NENG 203T
substitutes for NENG 203 toward the prerequisite in any course.
NENG 301 Thermodynamics and Kinetics of Nanomaterials  (3)
Applies the concepts of reaction rate, stoichiometry and equilibrium to the analysis of materials systems.
Use of rate expressions from reaction mechanisms and equilibrium or steady state assumptions. Design of
reactions via synthesis of kinetics, transport phenomena, and mass and energy balances. Thermodynamics
of multicomponent, multiphase chemical and biological systems. Applications of first, second, and third
laws of thermodynamics to open and closed systems. Prerequisites: satisfactory completion of AMAT
311, NENG 122, 202, and 203. 
NENG 302 Electronic, Optical and Magnetic Properties of Nanomaterials   (3)
Describes how the electronic, optical and magnetic properties of materials originate from their electronic
and molecular structure and how these properties can be designed for particular applications, for instance
in  optical  fibers,  magnetic  data  storage,  solar  cells,  transistors  and  other  devices.  Experimental
exploration  of  the  electronic,  optical  and  magnetic  properties  of  materials.  Includes  hands-on
experimentation using spectroscopy, resistivity, impedance and magnetometry measurements, behavior of
light in waveguides, and other characterization methods. Investigation of structure-property relationships
through practical materials examples.  Prerequisites: satisfactory completion of AMAT 311, NENG 122,
202, and 203.
NENG 303 Mechanics of Nanomaterials   (3)
Introduction to statics and the mechanics of deformable solids. Emphasis on the three basic principles of
equilibrium, geometric compatibility, and material behavior. Stress and its relation to force and moment;
strain  and  its  relation  to  displacement;  linear  elasticity  with  thermal  expansion.  Failure  modes.
Application to simple engineering structures such as rods, shafts, beams, and trusses. Application to
biomechanics  of  natural  materials  and  structures.  Introduces  mechanical  behavior  of  engineering
materials, and the use of materials in mechanical design. Emphasizes the fundamentals of mechanical
behavior of materials, as well as design with materials. Major topics: elasticity, plasticity, limit analysis,
fatigue, fracture, and creep. Materials selection. Prerequisites: satisfactory completion of AMAT 311,
NENG 122, 202, and 203.
NENG 304 Fluid Mechanics and Transport Processes  (3)
Introduces the mechanical principles governing fluid flow. Stress in a fluid. Conservation of mass and
momentum, using differential and integral balances. Elementary constitutive equations. Hydrostatics.
Exact solutions of the Navier-Stokes equations. Approximate solutions using control volume analysis.
44
 
Mechanical energy balances and Bernoulli's equation. Dimensional analysis and dynamic similarity.
Introduces boundary-layer theory and turbulence. Principles of heat and mass transfer. Steady and
transient conduction and diffusion. Radiative heat transfer. Convective transport of heat and mass in both
laminar and turbulent flows. Emphasis on the development of a physical understanding of the underlying
phenomena and upon the ability to solve real heat and mass transfer problems of engineering significance.
Prerequisites: satisfactory completion of  NENG 301, NENG 302, and NENG 303.
NENG 390 Capstone Research I.  Introduction and Literature Review  (3)
First course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research. During this
introductory course the student will work with a CNSE research team to investigate and identify a topical
research problem of interest to the wide fields of Nanoscale Science and Engineering. Emphasis will be
placed on a functional understanding of the current technical, peer-reviewed literature in the area of
interest and the drafting of a coherent research plan with relevant proof-of-concept research results.
Prerequisites: satisfactory completion of  NENG 301, NENG 302, and NENG 303.
NENG 405 Micro and Nano Materials Processing Technology  (4)
Introduces the theory and technology of micro/nano fabrication. Lectures and laboratory sessions on basic
processing techniques such as vacuum processes, lithography, diffusion, oxidation, and pattern transfer.
Students will gain experience with state of the art 300mm process technology as they follow the
fabrication of advanced test sites at leading edge ground rules. Emphasis on the interrelationships
between material properties and processing, device structure, and the electrical, mechanical, optical,
chemical or biological behavior of devices.  Prerequisites: satisfactory completion of NENG 304 and
NENG 390.
NENG 406 Fundamentals of Nanoelectronics  (4)
An introduction to the fundamentals of semiconductor materials and the effects of variations in the
material properties on the resulting current-voltage characteristics for two terminal devices, namely
resistors  and  diodes.  Topics  include  electron  energies  in  solids,  the  statistical  physics  of  carrier
concentration and motion in crystals, energy band models, drift and diffusion currents, recombination-
generation of carriers, continuity equations, and the p-n junction under equilibrium and bias conditions,
and metal-semiconductor Schottky and ohmic contacts. Non-idealities associated with real diodes are
introduced. Students will be introduced to manufacturing level device testing through the use of advanced
wafer level probes in the CNSE 300mm full flow process facility. Prerequisites: satisfactory completion
of NENG 304 and NENG 390.
NENG 407 Thin Film and Nanomaterials Characterization  (4)
Current  methods of directly  examining  the  nanostructure of materials.  Topics: optical microscopy,
scanning  electron  and  focused  ion  beam  microscopy,  field  ion  microscopy,  transmission  electron
microscopy, scanning probe microscopy, and microanalytical surface science methods. Emphasis is on the
electron-optical techniques. Samples to be examined will be selected from the various steps in the CNSE
baseline 300mm advanced test site working at leading edge ground rules.  Prerequisites: satisfactory
completion of NENG 405 and NENG 406.
NENG 408 Industrial Nanomanufacturing  (3)
Materials  and  manufacturing  based  on  nanoprocess  systems.  Industrial  engineering  concepts  are
introduced and the student prepared to perform basic engineering tasks, including design of workstations,
cells and lines. The key in operating a manufacturing facility is to make optimum use of all of the
available resources including labor, capital, technology, materials and time. Quality systems will cover
metrology and overall systems for industrial and service companies, including DOE, SPC, ISO, QS,
TQM.  The  materials  used  in  Electronic  manufacturing  will  be  reviewed  including  materials  and
45
 
components  that  are  used  to  produce  chips  and  systems.  DOE  will  cover  statistical  methods  for
determining settings of independent experimental variables, prior to experimentation, in order to make
meaningful inferences based upon subsequent measurements or simulations. Prerequisites: satisfactory
completion of NENG 405 and NENG 406.
NENG 411 Nanoelectronic IC Fabrication Processes  (3)
Basic tools and principles of single electronic component construction and some of the problem areas
encountered are discussed. Structural and electrical differences between logic, DRAM, flash devices will
be given. Fundamental modules of ion implantation, PECVD, LPCVD, RIE behavior, control of profiles,
diffusion, Lithography, yield control tactics, deposition, and oxidation kinetics will be covered. Future
changes will be given in terms of factors that drive speed of microprocessors. Prerequisite: permission of
instructor.
NENG 412 Micro and Nano Devices and Circuits  (3)
Micro- and nanoelectronic devices modeling, and basic micro- and nanoelectronic circuit analysis and
design. Physical electronics of semiconductor junction and MOS devices. Relating terminal behavior to
internal physical processes; developing circuit models; and understanding the uses and limitations of
different models. Use of incremental and large-signal techniques to analyze and design bipolar and field
effect transistor circuits, with examples chosen from digital circuits, single-ended and differential linear
amplifiers, and other integrated circuits. Prerequisite: permission of instructor. 
NENG 413 Nanoscale Optical and Optoelectronic Devices   (3)
Introduction to solid-state optoelectronic devices; display devices, laser diodes, photodetectors, and light
modulators; optical waveguides and fibers; topics also include design and fabrication of nanoscale
optoelectronic  components,  monolithic  and  hybrid  integration  between  photonics  and  electronic
components and associated challenges.  System application of optoelectronic devices will be discussed.
Prerequisite: permission of instructor.
NENG 414 Applications of Fields and Waves to Nanoscale Systems  (3)
Starting from Maxwell’s Equations, this course explores fundamental properties of quasistatic and
dynamic properties of electromagnetic waves including: radiation, diffraction, plane waves in lossless and
lossy media, skin effect, flow of electromagnetic power, Poynting’s Theorem, interaction of fields with
matter  and  particles,  and  applies  these  concepts  to  nanoscale  systems  and  devices.  Prerequisite:
permission of instructor.
NENG 415 Nanoelectronic Devices  (3)
Focus in on device physics and operation principles. Device and material options for advanced silicon
FETs at the nanoscale. Topics identified by the International Technology Roadmap for Semiconductors,
emerging research devices section. Non-silicon based devices such as carbon nanotubes, semiconductor
nanowires, molecular devices; and non-FET based devices such as single electron transistors (SET),
resonant tunneling diodes (RTD), and quantum dots, logic and memory devices. Prerequisite: permission
of instructor.
NENG 421 Introduction to Solar Cell Nanotechnology  (3)
Theory of conventional pn junction and excitonic solar cells. Design, fabrication, and characterization of
crystalline silicon, amorphous silicon, CdTe, CIGS, and tandem and organic solar cells. Emerging solar
cell concepts such as intermediate band gap and bioinspired solar cells. Emphasis is on the materials
science aspects of solar cells research. Module design and economic hurdles that must be overcome for
solar cell technology to generate a significant fraction of the world’s electricity. Group project to explore
one solar cell approach in depth.  Prerequisite: permission of instructor.
46
 
NENG 422 Introduction to Fuel Cell Nanotechnology  (3)
The course provides an introduction to the basic science and technology of fuel cells. It begins with an
overview of the various types of fuel cells and their technologies including hydrogen production and
storage. Next, the fundamental principles involved in the design and analysis of fuel cell components and
systems are described. Topics include the thermodynamics of fuel cells, namely, cell equilibrium, standard
potentials, and Nernst equation; ion conduction and sorption in proton-exchange membranes; mass
transport in gas-diffusion layer; and kinetics and catalysis of electrocatalytic reactions of anode and
cathode for hydrogen, direct methanol, solid oxide, and molten carbonate fuel cells. The transport and
reaction in fuel cells are finally combined to provide their overall design and performance characteristics.
Prerequisite: permission of instructor.
NENG 423 Renewable and Alternate Energy Nanotechnologies  (3)
An overview of various renewable energy technologies and their current applications. Emphasis will be
placed on energy consumption, efficiency, and conservation. Quantification of incident solar energy is
covered in detail along with the basic physics of energy conversion. Technologies include passive and
active solar thermal, photovoltaics, wind turbines, small-scale hydrodynamic generation, fuel cells, and
hydrogen. Topics will include thermoelectrics, batteries, ultracapacitors etc. Prerequisite: permission of
instructor.
NENG 424 Nanoscale Chemical and Biological Sensors (3)
Principles of design, operation, and implementation principles of chemical and biological sensors. Focus
on the application of fundamental sensing mechanisms and architectures to prevailing and emerging
techniques for device design and integration within a specific chemical and/or biological sensing system.
 Emphasis will be placed on the engineering of the signal transduction mechanism and and implications
towards design and fabrication. Prerequisite: permission of instructor.
NENG 431 Advanced Materials Processing for NEMS/MEMS  (4)
The course will cover advanced topics of good practices in the selection of organic and inorganic
materials based on properties, processes and economics for product design. Students fabricate MOS
capacitors,  nanomechanical  cantilevers,  and  micro/nanofluidic  mixers.  Prerequisite:  permission  of
instructor.
NENG 432 Interfacial Engineering in Nanobiological Systems  (3)
Fundamentals of interfacial dynamics, energy transduction, kinetics, and transport for nanobiological and
bioengineered systems. This course will explore how biological systems interact with engineered systems
at the nanoscale, including how energy is generated and transduced at the nano-bio interface. Prerequisite:
permission of instructor.
NENG 433 NEMS/MEMS for Chemical and Biological Sensors  (3)
NEMS/MEMS design, processing, fabrication approaches, and operational principles for chemical and
biological sensors. Focus on fabrication strategies and techniques for integrating specific transduction
techniques and engineered coatings for chemical and biological applications. Emphasis will be placed on
design and fabrication to enable target sensitivity and selectivity. Prerequisite: permission of instructor.
NENG 434 BioMEMS and BioNEMS  (3)
Introduction to the cross-disciplinary application of MEMS and NEMS to the biological sciences. Topics
include the interaction of living cells/tissues with nanofabricated structures, micro/nanofluidics for the
movement and control of solutions, and the development of I/O architectures for efficient readout of bio-
reactions. Prerequisite: permission of instructor.
47
 
NENG 435 Nanobiological Systems  (3)
Introduction to basic concepts in nanobiology and the interface between nano and biological systems.
This course will seek to introduce basic nanobiological concepts to non-biologists. The course will
initially focus on fundamental biological principles such as DNA/RNA synthesis/replication, protein
synthesis,  and  the  biochemistry  of  basic  biomolecules  and  cells.  The  course  will  then  discuss
nanobiological applications. These include biosensors, bioinformatics, nanobiological materials, and
biomimetics. Prerequisite: permission of instructor.
NENG 441 Nanoscale Patterning  (3)
The class will follow the transition of a sample pattern from a CAD file to its physical realization for both
production manufacturing and research. Topics covered include optical reduction lithography, electron
beam lithography, imprint lithography and resist systems. Sources of error and error characterization of
pattern placement, size control and pattern fidelity. Practical limits of resolution will be discussed.
Prerequisite: permission of instructor.
NENG 442 Light Optics for Nanoengineering  (3)
Applied optics for nanoscale patterning and metrology. Paraxial optics, lens makers equation, 3rdst order
optics, Seidel aberrations, Zernike polynomials, compound systems, numerical aperture, diffraction limit.
Specific  examples  applied  to  lithography  using  193nm  immersion  and  EUV  techniques.  Optical
specifications for patterning and metrology equipment including economic tradeoffs. Techniques for
optical resolution enhancement. Prerequisite: permission of instructor.
NENG 443 Charged Particle Optics for Nanoengineering  (3)
Applied optics using using charged particles for nanoscale patterning and metrology. Lorentz force law,
electrostatic and magneto static lenses. Sources, correction and deflection elements. Geometrical optics
based upon relativistic classical mechanics. Quantum based wave optics. Prerequisite: permission of
instructor.
NENG 444 Electron Beam Pattern Generation  (3)
A comprehensive review of electron beam pattern generator technology including beam generation,
control electronics, mechanical subsystems and system software. Special attention will be given to issues
that  arise  when  patterning  for  nanoscale  dimensions  and  accuracy  such  as  proximity  effects  and
throughput limitations. Prerequisite: permission of instructor.
NENG 451 Nanophotonics   (3)
Recent developments in micro- and nanophotonic materials and devices. Concepts of photonic crystals. 
Integrated photonic circuits. Photonic crystal fibers. Superprism effects. Optical properties of metallic
nanostructures.  Sub-wavelength  phenomena  and  plasmonic  excitations.  Prerequisite:  permission  of
instructor.
NENG 452 Magnetic Nanostructures   (3)
Magnetic  moments,  magnetic  exchange  and  ferromagnetism,  types  of  magnetic  order,  magnetic
anisotropy, domains, domain walls, hysteresis loops, hard and soft magnetic materials, demagnetization
factors, and applications of magnetic materials, especially magnetic nanostructures and nanotechnology.
Tools include finite-element and micro/nanomagnetic modeling. Design topics include electromagnet and
permanent  magnet,  electronic  article  surveillance,  magnetic  inductors,  bio-magnetic  sensors,  and
magnetic drug delivery. Prerequisite: permission of instructor.
NENG 453 Organic Semiconductors   (3)
The science and engineering of organic semiconductors and their use in electronic and photonic devices.
methods for fabricating thin films and devices; relationship between chemical structure and molecular
48
 
packing on properties such as band gap, charge carrier mobility and luminescence efficiency; doping;
field-effect transistors; light-emitting diodes; lasers; biosensors; photodetectors and photovoltaic cells.
Prerequisite: permission of instructor.
NENG 454 Analysis of Thin Films and Interfaces   (3)
The science and technology of micro/nanoanalytical techniques, including Auger electron spectroscopy
(AES), Rutherford backscattering spectroscopy (RBS), secondary ion mass spectroscopy (SIMS), ion
scattering spectroscopy (ISS), and x-ray photoelectron spectroscopy (XPS or ESCA). Generic processes
such as sputtering and high-vacuum generation. Prerequisite: permission of instructor.
NENG 455 Nanoscale Polymer Science & Engineering  (3)
Overview of engineering analysis and design techniques for nanoscale synthesis of polymers. Treatment
of materials properties selection, mechanical characterization, and processing in design of load-bearing
and environment-compatible structures. Prerequisite: permission of instructor.
NENG 456 Nanoscale Interfacial Engineering  (3)
The dynamic behavior of fluid interfaces. Concepts of interfacial stress, dynamic interfacial properties,
and surfactant adsorption applied to surface tension driven flow, interfacial instabilities, the influence of
surface-active agents on interfacial hydrodynamics. Prerequisite: permission of instructor.
NENG 457 Modeling of Nanomaterials and Systems  (3)
Introduction to modeling, analysis, and control of dynamic systems. Modeling of mechanical, electrical
and electromechanical systems. Time-domain and Laplace-Transform solutions. Block diagrams and
transfer functions. Analysis and design of feedback control systems. Control system representation and
characteristics. System performance specifications. Prerequisite: permission of instructor.
NENG 490 Capstone Research II.  Team Research and Project Review  (3)
Second course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research.  During this
intermediate course the student will report progress of the CNSE research team in the designated project
area focusing on the student’s efforts and results. This ‘project review’ will conform to prevailing formats
and reporting structures for profession-level industry or government-funded research to introduce the
student to professional research management. Emphasis will be placed on implementation of the student’s
research plan and reporting of progress or challenges encountered. Prerequisites: satisfactory completion
of  NENG 304 and NENG 390.
NENG 492 Capstone Research III.  Team Research and Final Report  (3)
Third course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research. During this final
course the student will provide a final report on the research project with an emphasis placed on
achievement of the initial goals of the study as well as challenges encountered and lessons learned.
Prerequisite: permission of instructor.
NENG 493 Capstone Research III.  Team Research and Final Report (Honors)  (3)
Third course in a 3-course series representing and original, substantive, team-based research project to
introduce the student to professional-level Nanoscale Science and Engineering research. During this final
course the student will provide a final report on the research project with an emphasis placed on
achievement of the initial goals of the study as well as challenges encountered and lessons learned.
Prerequisite: permission of CNSE Honors Director.
49
 
NENG 498 Current Topics in Nanoscale Science and Engineering  (1-6)
Seminar course for upper-level undergraduate students. Students will receive individualized instruction
regarding literature review on topics relevant to student’s capstone research and concentration areas.
Prerequisite: permission of instructor.
50
 
APPENDIX VI.3
INDEPENDENT STUDY AND RESEARCH COURSE
NNSE 397 Independent Study and Research (1-6)
Independent study or research in an area of nanoscale science or nanoscale engineering designed for the
undergraduate student who desires to engage in study of a subject beyond the introductory or survey
level, particularly that which builds upon related prior academic achievement and experience. May be
repeated, but each registration must be for an approved project. The normal credit load for this course is 3
credits; students desiring more than 3 credits must submit a request including justification to the CNSE
Office of Student Services. (1-6 credits as approved). Prerequisite(s): Permission by CNSE Office of
Student Services and consent of supervising CNSE  instructor. Further information and application
requirements may be obtained from the CNSE Office of Student Services.
51
 
APPENDIX VI.4
Nanoscale Engineering Courses
 Designated as Non-Liberal Arts and Sciences
Based on the definition of Non-Liberal Arts & Sciences courses that I forwarded you last week, and a
review of our proposed curriculum we are propose the following CNSE undergraduate courses be
designated as Non-Liberal Arts & Science courses:
NENG 405 Micro and Nano Materials Processing Technology
NENG 408 Industrial Nanomanufacturing
NENG 411 Nanoelectronic IC Fabrication
NENG 444 Electron Beam Pattern Generation
52
 
APPENDIX VI.5
UNDERGRADUATE “NANO” COURSES AT OTHER SUNY INSTITUTIONS
VI.5.1. Binghamton University, SUNY
MTLE 567 Physical Phenomena in Micro- and Nanotechnology (3)
As size of a device or structure decreases below approximately 100 nm, physical forces begin to dominate
the structure's behavior that are different from those encountered in our macroscale world. As the size
continues to decrease, still other forces begin to dominate in various size regimes. Known as "scaling" of
physical phenomena, this is extremely important in the design, fabrication and operation of devices with
microscale or nanoscale geometries. An understanding of these forces is beneficial to avoiding any
difficulties they may introduce, as well as enabling innovative, non-traditional means of creating new
functional structures. Length-scale dependencies of various forces and length scales typical of many
micro-nanodevices are covered. Case studies of various sensors, micromachines and nanotechnologies
illustrate the relevance of these scaling phenomena. Prerequisites: graduate standing in engineering or
science with undergraduate work in engineering or either physical, chemical or biological sciences.
MTLE 573 Nanotechnology in Small Scale Systems (3) 
A survey of basic concepts and examples of nanotechnology in small scale systems, including electronic
and optical devices, sensors, micro-electromechanical and materials systems for nanomedicine, etc.
ME 567 Physical Forces at Micro- and Nanoscales (3)
Scaling of physical phenomena at microscale or nanoscale geometries. Electromagnetic forces, fluid
mechanics, solid mechanics, optics, thermal transport, capillary forces, van der Waals forces, sensors,
MEMS, microfluidics, microactuators. Case studies of micro- and nanodevices to illustrate scaling of
physical forces at extremely small scales. Prerequisite: graduate standing or consent of department chair.
VI.5.2 University at Buffalo, SUNY
EE 240 Nanotechnology, Engineering, and Science (3)
Targeted at undergraduate students in the early stages of their education. The major goals and objectives
are to provide second year students with knowledge and understanding of nanoelectronics as an important
interdisciplinary subject. Through examples, exercises, and educational Java applets the course covers
electromagnetic  waves  and  quantum  mechanics,  including  the  quantum-mechanical  origin  of  the
electrical  and  optical  properties  of  materials  and  nanostructures,  chemically-directed  assembly  of
nanostructures, biomolecules, traditional and nontraditional methods of nanolithography, and interactions
between electronic and optical properties, as well as forefront topics such as organic heterostructures,
nanotubes, and quantum computing.
EE 342 Nanotechnology Engineering and Science Lab (1)
The  laboratory  course consists  of ten  experiments,  divided  into two groups: five Scanning  Probe
Microscope experiments and five experiments devoted to phenomena that form the basis for modern
Nanoelectronics and Nanotechnology. A complete set of laboratory experimental modules delivers to
students a hand-ons experience in this field.
EE 422 Nanomaterials (3)
The recent emergence of fabrication tools and techniques capable of constructing nanometer-sized
structures has opened up numerous possibilities for the development of new devices with size domains
53
 
ranging from 0.1 - 50 nm. The course introduces basic single-charged electronics, including quantum dots
and  wires,  single-electron  transistors  (SETs),  nanoscale  tunnel  junctions,  and  so  forth.  Giant
magnetoresistance (GMR) in multilayered structures are presented with their applications in hard disk
heads, random access memory (RAM) and sensors. Discusses optical devices including semiconductor
lasers incorporating active regions of quantum wells and self assembled formation of quantum-dot-
structures for new generation of semiconductor layers. Finally, devices based on single- and multi-walled
carbon nanotubes are presented with emphasis on their unique electronic and mechanical properties that
are expected to lead to ground breaking industrial nanodevices. The course also includes discussions on
such fabrication techniques as laser-ablation, magnetron and ion beam sputter deposition, epitaxy for
layer structures, rubber stamping for nanoscale wire-like patterns, and electroplating into nanoscale
porous membranes.
EE 424 Introduction to Nanoelectronics, Nanostructure Physics, and Applications (3)
Covers 2-D electron systems, quantum wires and dots, ballistic transport, quantum interference, and
single-electron tunneling.
EE 428 BioMEMS and Lab-on-a-Chip (3) 
Covers various commonly used micro/nanofabrication techniques, microfluidics, various chemical and
biochemical applications such as separation, implantable devices, drug delivery, and microsystems for
cellular  studies  and  tissue  engineering.  Discusses  recent  and  future  trends  in  BioMEMS  and
nanobiosensors. Students will gain a broad perspective in the area of micro/nano systems for biomedical
and chemical applications.
VI.5.3 University at Stony Brook, SUNY
BME 213/MEC 213/EST 213  Studies in Nanotechnology (3)
The emerging field of nanotechnology develops solutions to engineering problems by taking advantage of
the unique physical and chemical properties of nanoscale materials. This interdisciplinary, co-taught
course introduces materials and nano-fabrication methods with applications to electronics, biomedical,
mechanical  and  environmental  engineering.  Guest  speakers  and  a  semester  project  involve  ethics,
toxicology, economic and business implications of nanotechnology. Basic concepts in research and design
methodology and characterization techniques will be demonstrated. Course is cross-listed as BME 213,
MEC 213, and EST 213 and is required for the Minor in Nanotechnology Studies (NTS).
BME 318 Nanofabrication in Biomedical Applications (3)
Theory and applications of nanofabrication. Reviews aspects of nanomachines in nature with special
attention to the role of self-lubrication, intracellular or interstitial viscosity, and protein-guided adhesion.
Discusses current nanofabricated machines to perform the same tasks and considers the problems of
lubrication, compliance, and adhesion. Self-assembly mechanisms of nanofabrication with emphasis on
cutting edge discovery to overcome current challenes associated with nanofabricated machines.
VI.5.4 SUNY Institute for Technology (SUNYIT)
ETC 290 Introduction to Nanotechnology (2) 
An introductory course covering fundamentals of nanotechnology, its applications and future challenges.
Course content includes an introduction to nanodevices, fabrication, imaging and characterization of
nanodevices, nanoelectronics building blocks, nanosensors and nanocomputing. 
54
 
ETC 392 Microelectromechanical System (MEMS) Based Nanotechnology (2) 
Introduces  the  student  to  the  emerging  field  of  microelectromechanical  systems  (MEMS)  based
nanotechnology. Topics will include introduction to nanonscale systems, methods of fabrications and
packaging of MEMS, principle of microactuation, visualization and applications of nano and micro
systems. 
VI.5.5. NYS College of Ceramics at Alfred University
CEMS 438 - Nano-Technology (3)
No description provided in the College of Ceramics course catalog.
CEMS 513 - Nano-Structured Materials (3)
This course provides a basic knowledge of nano-structured materials. The first section deals with
fundamentals of the synthesis processes, e.g. gas phase reactions or precipitation reactions. In the second
section the various applications and properties of nano-structured materials will be discussed. Examples
are quantum dot (lasers), ductile ceramics, solar cells, memory devices, or magnetic refrigeration.
55

Metadata

Resource Type:
Document
Rights:
Date Uploaded:
December 28, 2018

Using these materials

Access:
The archives are open to the public and anyone is welcome to visit and view the collections.
Collection restrictions:
Access to this record group is unrestricted.
Collection terms of access:
Records in this collection were created by the University at Albany, SUNY, and are public records.

Access options

Ask an Archivist

Ask a question or schedule an individualized meeting to discuss archival materials and potential research needs.

Schedule a Visit

Archival materials can be viewed in-person in our reading room. We recommend making an appointment to ensure materials are available when you arrive.